Skip to content
Omnikalc

Goniometry range of motion percent of normal calculator

Choose the joint movement and enter the active and the passive range measured with a goniometer to get the normal reference, the active range as a percent of normal, the deficit in degrees and the difference between active and passive range.

Updated on

Educational tool, not medical advice: this page does not diagnose and does not replace a doctor, nurse or pharmacist. It has not been reviewed by a healthcare professional. Editorial and medical policy

Your inputs
°

Value out of range

°

Value out of range

Results

Active range as a percent of normal

81 %

A mild limitation (75 to 89 % of normal)
Normal range for this movement (AAOS reference)
135 °
Deficit of the active range
25 °
Passive range minus active range
10 °
A gap of 5 to 14 degrees: a mild lag between active and passive motion

The range of motion calculator compares goniometer readings with normal reference values and gives the active range as a percent of normal, the deficit and the gap between passive and active range for twelve common joint movements.

How the calculation works

  • Choose the joint movement.
  • Enter the active and the passive range measured.
  • Read the percent of normal, the deficit and the gap.

Example

For knee flexion the reference is 135 degrees. An active range of 110 degrees is 110 / 135 = 81 % of normal, a deficit of 25 degrees, a mild limitation. A passive range of 120 degrees means the passive range exceeds the active one by 10 degrees, a mild lag that may come from weakness or pain.

Why it matters

The calculator helps physical therapists, sports physicians, orthopedic surgeons, occupational therapists and students who record joint ranges after an injury or a surgery and follow recovery.

Good to know

The reference values are those of the American Academy of Orthopaedic Surgeons, which are used worldwide, and the movement is measured from the zero starting position of the joint, with the patient in a standard posture. The reading should be done at the same time of day, with the same instrument and the same landmarks, since the error of a goniometer is about 3 to 5 degrees between measurements and more between examiners. A change of less than 5 degrees should therefore not be taken as real. Recovery after a knee operation or a fracture is usually followed by comparing the range with the other side, and with targets such as 90 degrees of flexion at two weeks and 120 degrees at six weeks, depending on the surgery. The sum of the deficits of several joints can be used to rate the loss of function of a limb in disability evaluations, but that requires the guides used in each country. The calculator is for follow-up and does not give a diagnosis.

The Cobb angle calculator measures the spine, the leg length calculator checks the lower limb, the patellar height calculator measures the knee on X-ray and the grip strength calculator measures the hand.

Frequently asked questions

What is goniometry?

It is the measurement of joint angles with a goniometer, a protractor with two arms. The center is placed on the axis of the joint, one arm along the fixed segment and the other along the moving segment.

What is the difference between active and passive range?

Active range is what the patient can do alone by muscle action, and passive range is what the examiner can move the joint to. A passive range larger than the active one points to weakness, pain or a nerve problem, while equal limited ranges point to stiffness of the joint.

Are the normal values the same for everyone?

No. They vary with age, sex and activity, and children and young women are often more flexible. The AAOS values are an average reference, and the other side of the same patient is the best comparison.

Was this calculator helpful?

Thanks for your feedback!

Results are estimates provided for information purposes. They do not replace professional advice.