Skip to content
Omnikalc

Oxygen dissociation curve calculator

Enter the PaO2, the pH, the temperature and the base excess to get the hemoglobin saturation, the P50 and the oxygen content of the blood.

Updated on

Educational tool, not medical advice: this page does not diagnose and does not replace a doctor, nurse or pharmacist. It has not been reviewed by a healthcare professional. Editorial and medical policy

Your inputs
mmHg

Value out of range

Value out of range

°F

Value out of range

mmol/L

Value out of range

g/dL

Value out of range

Results

Hemoglobin saturation under these conditions

87.5 %

Saturation at normal pH, temperature and base excess
90.6 %
P50 under these conditions (normal 26.8)
29.9 mmHg
Shift of the curve at the P50 (positive = right)
3.1 mmHg
Arterial oxygen content (CaO2)
16.59 mL/dL
Share of the oxygen that is dissolved
1.1 %

The oxygen dissociation curve calculator gives the hemoglobin saturation for a PaO2 under the given conditions and under normal ones, the P50 and the shift of the curve, the arterial oxygen content and the share dissolved in plasma.

How the calculation works

  • Enter the PaO2 in mmHg.
  • Enter the pH, the body temperature and the base excess to shift the curve.
  • Enter the hemoglobin to get the oxygen content.

Example

A PaO2 of 60 mmHg mmHg gives a saturation of 90.6 % under normal conditions. At a pH of 7.3, the P50 is 29.9 mmHg, a shift of 3.1 mmHg, and the saturation is 87.5 %. With 14 g/dL g/dL of hemoglobin the oxygen content is 16.59 mL/dL, of which 1.1 % is dissolved.

Why it matters

The calculator helps students of physiology, medicine and anesthesia, and clinicians who want to see how acidosis, fever or cold change the saturation for a given PaO2, and how much oxygen the blood carries.

Good to know

The Severinghaus equation is a fit to the average curve of adult blood, and it does not account for fetal hemoglobin, carbon monoxide or methemoglobin, or for a pCO2 effect beyond the pH. It is accurate in the usual clinical range and less so below 10 mmHg or in extreme conditions. A pulse oximeter measures the saturation directly and may differ, especially at low values. Use the temperature of the patient and the base excess from the blood gas. Dissolved oxygen is small in room air but matters in hyperbaric oxygen.

The oxygen delivery calculator multiplies the content by the cardiac output, the A–a gradient calculator checks the lungs, the Henderson–Hasselbalch calculator links pH and bicarbonate and the base excess calculator gives the metabolic part of the acid–base state.

Frequently asked questions

What is the oxygen dissociation curve?

It is the S-shaped curve that relates the saturation of hemoglobin with oxygen to the partial pressure of oxygen in the blood. The curve is steep between 20 and 60 mmHg, where small drops of PaO2 release much oxygen to tissues, and flat above 80 mmHg, where saturation barely rises.

What is the P50?

It is the PO2 at which hemoglobin is 50 percent saturated, normally about 26.8 mmHg in adult blood at pH 7.40 and 37 °C. A higher P50 means the curve is shifted to the right and hemoglobin releases oxygen more easily, and a lower P50 means a shift to the left, with a stronger hold.

What shifts the curve?

Acidosis, a high temperature, a high pCO2 and a high level of 2,3-DPG shift the curve to the right (the Bohr effect), while alkalosis, cold and a low 2,3-DPG shift it to the left. Fetal hemoglobin and carbon monoxide also shift the curve to the left. The calculator includes the pH, the temperature and the base excess.

Which equation is used?

The calculator uses the Severinghaus equation, SaO2 = 100 / (23 400 / (PO2³ + 150 PO2) + 1), after correcting the PO2 to standard conditions with 10^(0.024(37 − T) + 0.48(pH − 7.4) − 0.0013 BE). It is accurate to about one percent in the usual range, but it is no substitute for a measured saturation.

Was this calculator helpful?

Thanks for your feedback!

Results are estimates provided for information purposes. They do not replace professional advice.