Skip to content
Omnikalc

Contact lens oxygen transmissibility (Dk/t) calculator

Enter the oxygen permeability of the lens material and the center thickness to get the oxygen transmissibility Dk/t, the minimum values for daily and overnight wear, the Dk needed at your thickness and the maximum thickness for overnight wear.

Updated on

Educational tool, not medical advice: this page does not diagnose and does not replace a doctor, nurse or pharmacist. It has not been reviewed by a healthcare professional. Editorial and medical policy

Your inputs
barrer

Value out of range

µm

Value out of range

Results

Oxygen transmissibility Dk/t

125.0 × 10⁻⁹

High: well above the criterion for overnight wear
Dk needed for daily wear at this thickness
19.2 barrer
Dk needed for overnight wear at this thickness
69.6 barrer
Maximum thickness for overnight wear with this Dk
115 µm
Maximum thickness for daily wear with this Dk
417 µm

The contact lens Dk/t calculator gives the oxygen transmissibility of a lens from the oxygen permeability of the material and the center thickness, with the Dk needed and the maximum thickness for daily and overnight wear.

How the calculation works

  • Enter the Dk of the material in barrers.
  • Enter the center thickness in micrometers.
  • Read the Dk/t and the criteria.

Example

A silicone hydrogel lens with a Dk of 100 barrers and a thickness of 80 µm has a Dk/t of 100 × 100 / 80 = 125.0 × 10⁻⁹. The lens meets the overnight criterion of 87. At this thickness, the Dk needed is 19.2 for daily wear and 69.6 for overnight wear. With a Dk of 100, the thickness may reach 115 µm for overnight wear.

Why it matters

The calculator helps contact lens fitters, optometry students, lens makers and wearers who want to compare lenses and to understand why modern silicone hydrogel lenses are more suitable for long hours of wear.

Good to know

The Dk values quoted by makers are measured on a flat sample under controlled conditions, and several methods exist, so values from different makers are not always comparable. In silicone hydrogels the Dk is largely independent of the water content, whereas in conventional hydrogels the Dk rises with the water content, which is why these lenses must be thick enough to hold their shape and have a low Dk/t. The cornea gets oxygen from the air through the tear film when the eye is open, and from the blood vessels of the eyelid when closed, which lowers the supply and explains the higher criterion for sleeping. The criteria prevent corneal swelling, but other complications such as dryness, deposits and infection are not oxygen-related and depend on hygiene, the replacement schedule and the length of wear. Sleeping in lenses is associated with a higher risk of infection even with a high Dk/t. Follow the schedule given by the eye care professional.

The keratometry calculator gives the corneal power used to fit a lens, the vertex distance calculator converts the power between glasses and contact lenses, the lens thickness calculator treats spectacle lenses and the retinal illuminance calculator treats the light reaching the eye.

Frequently asked questions

What are Dk and Dk/t?

Dk is the oxygen permeability of a material, in barrers (10⁻¹¹ units), a property of the material. Dk/t divides it by the thickness and gives the transmissibility of a particular lens. A lens made of the same material but thinner transmits more oxygen.

What are the Holden-Mertz criteria?

In 1984 Holden and Mertz found that the cornea needs a Dk/t of at least 24 × 10⁻⁹ to avoid swelling in daily wear, and 87 × 10⁻⁹ to avoid it during sleep. They are still the usual reference.

Why is the thickness at the center only part of the story?

A minus lens is thicker at the edge and a plus lens at the center, so the average oxygen available varies across the cornea. The Dk/t at the thickest part of the lens is the limiting value for that region.

Was this calculator helpful?

Thanks for your feedback!

Results are estimates provided for information purposes. They do not replace professional advice.