Skip to content
Omnikalc

Prentice rule calculator (induced prism)

Enter the lens power in the horizontal and vertical directions and the distance between the optical center and the point of view to get the horizontal and vertical prism, the total prism, the base direction and the image displacement.

Updated on

Educational tool, not medical advice: this page does not diagnose and does not replace a doctor, nurse or pharmacist. It has not been reviewed by a healthcare professional. Editorial and medical policy

Your inputs
D

Value out of range

D

Value out of range

mm

Value out of range

mm

Value out of range

Results

Total induced prism

2.41 prism diopters

A notable prism: it can cause eye strain, headaches or double vision
Horizontal prism
2.00 prism diopters
Vertical prism
1.35 prism diopters
Angle of the prism from the horizontal
34.0 °
Deviation angle of the light
1.38 °
Image shift at 1 meter
2.41 cm

The Prentice rule calculator gives the horizontal prism, the vertical prism, the total prism and the image shift produced when the eye looks through a point that is not the optical center of a lens.

How the calculation works

  • Enter the power of the lens horizontally and vertically.
  • Enter the distance from the optical center in millimeters.
  • Read the prism and its angle.

Example

A lens of −4.00 D horizontally and −4.50 D vertically, viewed 5 mm and 3 mm from the optical center, gives 4 × 0.5 = 2.00 Δ horizontally and 4.5 × 0.3 = 1.35 Δ vertically. The total prism is 2.41 Δ at 34.0° from the horizontal, which shifts an image by 2.41 cm at a distance of 1 meter.

Why it matters

The calculator helps optometry students, opticians and ophthalmic lab technicians who check centration, explain why a strong prescription is uncomfortable, or compute the prism in a reading position.

Good to know

The rule is a thin lens approximation, accurate for the small decentrations seen in practice, and in a thick lens the effect is slightly different. In an oblique meridian of an astigmatic lens, the power in the direction of the decentration must be used, which requires combining sphere and cylinder, and here the horizontal and vertical powers are taken as given. Spectacle makers use the rule in both directions: to remove an unwanted prism by centering the lenses on the pupils, and to build a wanted prism for a patient with double vision by decentring the lenses on purpose. Prism measured in a lens by a lensmeter at the reading level is compared with the tolerances of the standard applied in your country. Unwanted prism is a frequent reason for a pair of glasses that does not suit a wearer despite a correct prescription, and the solution is often remaking the lenses with the optical centers placed at the measured pupil heights.

The prism conversion calculator links prism diopters, degrees and centrads, the vertex distance calculator converts lens power, the minimum blank calculator treats decentration and the spherical equivalent calculator converts prescriptions.

Frequently asked questions

What is the Prentice rule?

It states that the prism in prism diopters equals the lens power in diopters multiplied by the decentration in centimeters, which is the distance between the point looked through and the optical center. A 4 D lens viewed 1 cm off center induces 4 prism diopters.

What is the direction of the prism?

For a plus lens the base points toward the optical center, and for a minus lens the base points away from it. So the effect on the eyes depends on the sign of the power as well as the direction of the decentration.

When does it matter?

It matters for strong lenses, for reading through the lower part of the lens and for differences in power between the eyes, because unequal vertical prism at reading level is not fused by the eyes. Wide frames and a wrong centration also cause it.

Was this calculator helpful?

Thanks for your feedback!

Results are estimates provided for information purposes. They do not replace professional advice.