Skip to content
Omnikalc

Minimum blank size and decentration calculator

Enter the frame eye size, the bridge, the effective diameter and the pupillary distance of the wearer to get the frame PD, the decentration per lens, the minimum blank size and the next standard blank size.

Updated on

Educational tool, not medical advice: this page does not diagnose and does not replace a doctor, nurse or pharmacist. It has not been reviewed by a healthcare professional. Editorial and medical policy

Your inputs
mm

Value out of range

mm

Value out of range

mm

Value out of range

mm

Value out of range

mm

Value out of range

Results

Minimum blank size

68.0 mm

A usual blank size
Frame PD (eye size + bridge)
70 mm
Decentration per lens
4.0 mm
Next standard blank size (steps of 5 mm)
70 mm
Unused blank diameter beyond the frame
12.0 mm

The minimum blank size calculator gives the decentration of each lens and the minimum diameter of the uncut lens needed for a frame and the pupillary distance of the wearer, with the next standard blank size.

How the calculation works

  • Enter the eye size, the bridge and the effective diameter.
  • Enter the pupillary distance of the wearer.
  • Read the decentration and the blank size.

Example

An eye size of 52 mm and a bridge of 18 mm give a frame PD of 70 mm. For a PD of 62 mm the decentration is (70 − 62) / 2 = 4.0 mm per lens. With an effective diameter of 58 mm and an allowance of 2 mm, the minimum blank is 58 + 2 × 4.0 + 2 = 68.0 mm, so a 70 mm blank is needed.

Why it matters

The calculator helps opticians, ophthalmic lab technicians and optometry students who choose a frame for a strong prescription, order lenses and explain a thickness difference between two frames.

Good to know

The decentration is computed from the distance pupillary distance, and for reading lenses the PD is smaller by 2 to 3 millimeters because the eyes converge, so use the near PD for near lenses. The effective diameter is a property of each frame shape, and the formula assumes a single vision lens where the optical center is at the pupil. In progressive lenses the fitting cross and the minimum fitting height matter too, and the blank must be large enough for the corridor to remain inside the cut lens. Errors on the pupillary distance of even two millimeters in a strong lens create an unwanted prism, which the Prentice calculator evaluates. Many labs have blanks in steps of 5 millimeters, from 60 to 80 millimeters, with the size limited by the material and the power, and very strong prescriptions may need free-form surfacing to reduce thickness and weight. If the blank required is larger than the available stock, choose a frame with a smaller eye size or a frame whose PD is closer to that of the wearer.

The lens thickness calculator estimates the edge thickness, the Prentice calculator treats the induced prism, the spectacle magnification calculator treats the image size and the vertex distance calculator converts the lens power.

Frequently asked questions

What is the minimum blank size?

It is the smallest diameter of an uncut round lens that can be cut to the frame once the optical centers are placed at the pupils of the wearer. It equals the effective diameter plus twice the decentration, with a small allowance.

What is the effective diameter?

It is twice the distance from the geometric center of the lens shape to its farthest point. The frame maker supplies it, and it is larger than the eye size, and a long or oval shape raises it much.

Why does the decentration matter?

The farther the pupils are from the center of the frame, the larger the blank needed, and in a minus lens the nasal or temporal edge becomes thicker. A frame with a PD close to the wearer PD saves thickness and cost.

Was this calculator helpful?

Thanks for your feedback!

Results are estimates provided for information purposes. They do not replace professional advice.