Skip to content
Omnikalc

Prism minimum deviation calculator

Enter the apex angle, the refractive index and the angle of incidence to get the minimum deviation, the exit angle and the deviation of the ray.

Updated on
Your inputs
°

Value out of range

Value out of range

°

Value out of range

Results

Minimum deviation

38.93 °

Angle of incidence at minimum deviation
49.46 °
Refraction angle at the first face
30.26 °
Exit angle
48.93 °
Deviation at the chosen incidence
38.93 °

The prism minimum deviation calculator gives the minimum deviation, the incidence angle at that minimum, the refraction angle, the exit angle and the deviation of a ray through a prism.

How the calculation works

  • Enter the apex angle of the prism and the refractive index of the glass.
  • Enter the angle of incidence of the ray on the first face.
  • The calculator applies Snell’s law at both faces and adds the deviations, then gives the minimum over all incidence angles.

Example

A prism with an apex angle of 60 ° and an index of 1.52 has a minimum deviation of 38.93 °, reached at an incidence of 49.46 °. A ray that arrives at 50 ° is refracted to 30.26 °, leaves at 48.93 ° and is deviated by 38.93 °, only a little more than the minimum.

Why it matters

The calculator helps physics students, teachers and optical technicians who work with prism spectrometers, binoculars, periscopes and dispersion experiments, and who need to find the deviation or the index of a glass from the angles.

Good to know

Near the minimum deviation the angle changes very slowly with the incidence, which is why spectrometers are set up at that position: a small error of alignment makes almost no error on the measurement. The index depends on the wavelength, so quote the line used, such as 589 nm for the sodium line. A thin prism with a small apex angle deviates the ray by about (n − 1) × A. If the apex angle is too large for the index, the second face reflects the light totally and nothing leaves, which is the case of a right-angle reflecting prism. Check the angles on the instrument with a sodium or mercury lamp before measuring an unknown glass, and read the vernier on both sides.

The refraction calculator applies Snell’s law at one surface, the critical angle calculator gives the limit of total reflection, the thin lens calculator handles lenses and the Fresnel reflectance calculator gives the part of the light that is reflected at each face.

Frequently asked questions

What is the minimum deviation of a prism?

A ray crossing a prism is deviated by an angle that depends on the angle of incidence. The deviation is smallest when the ray passes symmetrically, parallel to the base inside the glass. The minimum deviation is δ = 2 × asin(n × sin(A / 2)) − A, with A the apex angle and n the index of the glass.

How is the index found from the minimum deviation?

Measuring the minimum deviation on a spectrometer gives the index of a glass: n = sin((A + δ) / 2) / sin(A / 2). This is the classic method used to measure the index of a prism, and it works for each wavelength. It is accurate to about the fourth decimal when the angles are read to an arc minute.

Why does a prism split white light?

The index of glass is slightly higher for blue light than for red light, so blue is deviated more. This dispersion spreads white light into a spectrum. With the index of a crown glass of 1.51 for red and 1.53 for blue, the minimum deviation of a 60 degree prism changes by about 1.6 degrees across the visible spectrum.

When does the ray not leave the prism?

If the angle at the second face exceeds the critical angle, the ray is totally reflected and does not emerge. That happens for a large apex angle or a high incidence on the first face. The calculator then caps the exit angle at 90 degrees, and the deviation it gives is not a real one, so check the apex angle and the index.

Was this calculator helpful?

Thanks for your feedback!

Results are estimates provided for information purposes. They do not replace professional advice.