Skip to content
Omnikalc

Skin graft meshing ratio and donor area calculator

Enter the area of the wound to cover, the mesh ratio of the graft, the share of the nominal expansion actually obtained, an extra margin and the width of the dermatome to get the real expansion, the donor area to harvest and the length of the strip.

Updated on

Educational tool, not medical advice: this page does not diagnose and does not replace a doctor, nurse or pharmacist. It has not been reviewed by a healthcare professional. Editorial and medical policy

Your inputs
cm²

Value out of range

%

Value out of range

%

Value out of range

cm

Value out of range

Results

Donor skin area to harvest

78 cm²

Real expansion factor
1.70
A low expansion (under 1.8): better take and appearance, but more donor skin is needed
Nominal mesh ratio
2.0
Length of the strip at the width of the dermatome
7.8 cm

The skin graft meshing calculator gives the real expansion factor, the donor skin area and the length of the strip needed to cover a wound with a mesh ratio, from the wound area, the share of the nominal expansion obtained and a margin.

How the calculation works

  • Enter the wound area and choose the mesh ratio.
  • Enter the share of expansion obtained, the margin and the dermatome width.
  • Read the donor area and the length.

Example

To cover 120 cm² with a 2:1 mesh and 70 % of the nominal expansion, the real factor is 1 + (2 − 1) × 0.70 = 1.70. The graft needed is 120 / 1.7 = 70.6 cm², and with a 10 % margin the donor skin is 78 cm², which is a strip of 7.8 cm at a dermatome width of 10 cm.

Why it matters

The calculator helps plastic and burn surgeons, residents, operating room nurses and students who plan the harvest of skin for a burn or a wound, and want an idea of the size of the donor site.

Good to know

The nominal mesh ratio is a property of the mesher and its carrier, and it overstates the cover, because the gaps open only if the graft is pulled, and the skin does not usually stretch to the maximum. The real expansion also depends on the thickness of the graft, the site of the wound, the tension applied and the shrinkage of the graft after the harvest. Thin grafts take better and the donor site heals faster, in about 10 to 14 days, but they contract more, and thicker grafts give a better result but a slower donor site. The donor sites can be harvested again after healing in cases of large burns. A high ratio gives more cover, but the spaces must close by themselves, which is slow and can lead to a visible mesh pattern, so very large ratios such as 6:1 are used mostly with other techniques like the Meek method or a cover with an allograft. The surgeon decides the thickness and the ratio on the day. The calculator gives an estimate for planning only.

The Lund and Browder calculator estimates the burn area, the healing rate calculator follows the closure of the wound, the PUSH calculator scores pressure ulcers and the excision calculator plans the shape of a wound.

Frequently asked questions

What does the mesh ratio mean?

A skin graft is passed through a mesher that cuts slits in it, so it can be stretched to cover a larger area. A ratio of 3:1 means that the graft can in theory cover three times its own area.

Why is the real expansion lower?

Because the graft is not fully stretched on the wound, and the elasticity of the skin and the thickness of the graft limit the opening of the mesh. In practice the real expansion is often 50 to 80 % of the nominal one.

When is a low ratio chosen?

On the face, the hands and the joints, where appearance and function matter, a sheet graft or a ratio of 1.5:1 is chosen. High ratios are saved for large burns where the donor sites are limited.

Was this calculator helpful?

Thanks for your feedback!

Results are estimates provided for information purposes. They do not replace professional advice.