Skip to content
Omnikalc

Floor area ratio calculator: how much can you build on your lot?

Enter the lot area, the building floor area, the footprint and the maximum ratio allowed to get the FAR, the floor area still available and the lot coverage.

Updated on
Your inputs
ft²

Value out of range

ft²

Value out of range

ft²

Value out of range

Value out of range

Results

Floor area ratio (FAR)

0.427

Maximum floor area allowed
3,750 ft²
Floor area still available
550 ft²
Within the limit
Lot coverage
24.0%
Average number of storeys
1.78

The floor area ratio is the main number that sets how big a building may be on a lot. The floor area ratio calculator takes the lot area, the total floor area of the building, its footprint and the maximum ratio allowed and gives the floor area ratio, the maximum floor area allowed, the floor area still available, the lot coverage and the average number of storeys.

How the calculation works

  • Floor area ratio = total floor area of all storeys ÷ lot area. A one-storey building covering half the lot has a ratio of 0.5, and so does a two-storey building covering a quarter of it.
  • Maximum floor area = the maximum ratio × the lot area. It is the largest building that the zoning code allows on the lot.
  • Floor area still available = the maximum floor area − what you have already built or planned. A negative value means the project is over the limit.
  • Lot coverage = building footprint ÷ lot area. It is a separate limit in many codes, next to the floor area ratio.
  • Average number of storeys = total floor area ÷ footprint.

Example

A lot of 7 500 ft² has a house with 3 200 ft² of floor area on a 1 800 ft² footprint, and the zoning code allows a ratio of 0.5. The ratio is 3 200 ÷ 7 500 = 0.427. The maximum floor area is 0.5 × 7 500 = 3 750 ft², which leaves 550 ft² available. The lot coverage is 1 800 ÷ 7 500 = 24 percent, and the house has 3 200 ÷ 1 800 = 1.78 storeys on average.

Why it matters

Before you buy a lot, plan an extension or compare projects, the ratio tells you how much floor space the law lets you build. It lets you test a design quickly, find out whether a second storey fits, and see how a larger lot raises the allowed floor area in direct proportion.

Good to know

The calculator assumes that every storey counts in full. Real codes have exclusions, bonuses, height limits, setbacks and special rules for each zone, and the lot area may be counted before or after land given to the street. Take the final figures from your city’s planning office and check them before you commit to a design.

The price per square meter calculator compares the cost of space, and the land loan calculator estimates the financing of a lot.

Frequently asked questions

What is the floor area ratio?

It is the total floor area of a building divided by the area of the lot it stands on. Zoning codes use it to limit the bulk of buildings, whatever their shape. A lot of 10 000 ft² with a ratio of 1.0 allows 10 000 ft² of floor space, in one storey on the whole lot, or in four storeys on a quarter of it.

Which areas count as floor area?

It depends on the code. Many count the area inside the outer walls of every storey, and exclude basements, parking, attics below a set height and mechanical rooms. Some include covered porches or garages. Read the definition in your local zoning code before you rely on a figure.

What is the difference between FAR and lot coverage?

FAR limits the total floor area, while lot coverage limits the share of the lot that the building footprint covers. A tall thin building can meet a coverage limit and still break the ratio, and a low wide one can meet the ratio and break the coverage limit. Many codes set both.

Can a developer exceed the ratio?

Often yes, with a bonus. Many cities grant extra floor area in exchange for affordable housing, public space or other benefits, and some allow the transfer of unused floor area between lots. These bonuses are set by the city and need a permit.

Was this calculator helpful?

Thanks for your feedback!

Results are estimates provided for information purposes. They do not replace professional advice.