Skip to content
Omnikalc

Womersley number calculator: is blood flow in your vessel steady or pulsatile?

Enter the heart rate, the vessel radius and the blood viscosity to get the Womersley number, the pulse frequency and the thickness of the oscillating boundary layer.

Updated on

Educational tool, not medical advice: this page does not diagnose and does not replace a doctor, nurse or pharmacist. It has not been reviewed by a healthcare professional. Editorial and medical policy

Your inputs
bpm

Value out of range

mm

Value out of range

cP

Value out of range

Results

Womersley number α

18.89

Inertia dominates: the velocity profile is flat in the core with a thin wall layer
Pulse frequency
1.20 Hz
Thickness of the oscillating boundary layer R ÷ α
0.662 mm
Angular frequency ω
7.54 rad/s

Blood flow in arteries is not steady but pulsatile, and the Womersley number tells how much the pulsation matters. This Womersley number calculator finds it from the heart rate, the vessel radius and the blood viscosity. It also gives the pulse frequency, the angular frequency and the thickness of the oscillating boundary layer.

How the calculation works

  • Enter the heart rate, the inner radius of the vessel and the viscosity of the blood (about 3.5 cP, taking blood as a Newtonian fluid).
  • The pulse frequency is f = rate / 60, and the angular frequency is ω = 2π f.
  • The Womersley number is α = R √(ω ρ / μ), with a blood density of 1,060 kg/m³.
  • It also gives the thickness of the oscillating boundary layer, about R / α, the part of the vessel close to the wall in which viscosity matters.

Example

In the aorta, with an inner radius of 12.5 mm, a heart rate of 72 bpm (1.2 Hz) and a viscosity of 3.5 cP, the Womersley number is 18.9. The velocity profile is flat in the core, and viscous effects are confined to a layer 0.66 mm thick near the wall.

Why it matters

The Womersley number is used in biofluid mechanics and cardiovascular engineering to model flow in arteries, to design heart valves, stents and blood pumps, and to teach why the Poiseuille law works in small vessels but not in the aorta. It also helps to understand why the velocity profile changes along the arterial tree.

Good to know

The calculator is for an idealized straight, rigid, circular vessel with a Newtonian fluid and a sinusoidal pressure gradient at the fundamental frequency of the heartbeat. Real arteries are elastic, curved and branched, the pulse has several harmonics, and blood is non-Newtonian in small vessels. The result is an educational estimate, not a medical measurement, and is not meant for diagnosis or treatment.

The Poiseuille calculator covers the steady laminar flow that applies when α is small, the cardiac output calculator covers the flow of the heart, the heart rate zones calculator covers the pulse, and the Reynolds number calculator covers the steady inertial regime.

Frequently asked questions

What is the Womersley number?

It is α = R √(ω ρ / μ), a dimensionless number that compares the inertia of an oscillating flow with the viscous forces. It is the ratio of the vessel radius to the thickness of the boundary layer that the pulsation forms. It is the key parameter of pulsatile flow in arteries, and it was introduced by John R. Womersley in the 1950s.

What does a high or a low value mean?

For α below about 1 (small vessels and capillaries), the flow follows the pressure almost at once, and the Poiseuille parabolic profile is valid at each instant. For α above about 10 (large arteries), the fluid in the core moves as a block, the profile is flat, and viscous effects are limited to a thin layer at the wall. The range in between is transitional.

Why is blood taken as Newtonian?

In large and medium arteries, the shear rate is high enough that the viscosity of blood is nearly constant at about 3 to 4 cP. In small vessels, the red cells make the blood non-Newtonian, and the viscosity changes with the shear rate and the vessel size, so this calculator is less accurate there.

Is this a diagnostic tool?

No. The calculator is a physics and physiology teaching aid that gives an order of magnitude for an idealized vessel. It does not describe a patient or a measurement, and it must not be used for diagnosis or treatment. Clinical assessment of blood flow needs measurements and a health professional.

Was this calculator helpful?

Thanks for your feedback!

Results are estimates provided for information purposes. They do not replace professional advice.