Skip to content
Omnikalc

Richardson number calculator: shear against stability, which one wins?

Enter the potential temperature and wind speed at two levels and the height between them to get the gradient Richardson number and the wind difference for turbulence.

Updated on
Your inputs
°F

Value out of range

°F

Value out of range

mph

Value out of range

mph

Value out of range

ft

Value out of range

Results

Gradient Richardson number Ri

0.259

Marginal: turbulence can persist but is damped
Buoyancy term N² (× 10⁻⁴ s⁻²)
2.225
Shear term S² (× 10⁻⁴ s⁻²)
8.604
Wind difference at which Ri falls to 0.25
20.3 mph

Wind shear tries to stir the air, and a stable stratification tries to keep the layers apart. The Richardson number calculator takes the potential temperature and the wind speed at two levels and the height between them, and gives the gradient Richardson number, the buoyancy term N², the shear term S² and the wind difference at which the number falls to 0.25, the critical value for the start of turbulence.

How the calculation works

  • Enter the potential temperature and the wind speed at a lower and an upper level, and the height between them.
  • The calculator finds the buoyancy term N² = (g / θ) Δθ / Δz, the force that keeps stable air layers apart.
  • It then finds the shear term S² = (ΔU / Δz)², the wind change that tends to stir the layers.
  • The gradient Richardson number is Ri = N² / S². Below the critical value of 0.25, the shear wins and turbulence can start. Above about 1, stratification suppresses turbulence.

Example

Between two levels 1,000 ft (304.8 m) apart, the potential temperature rises from 59 °F to 62.6 °F (2 K) and the wind increases from 10 mph to 30 mph (8.94 m/s). N² = 9.80665 / 289.15 × 2 / 304.8 = 2.225 × 10⁻⁴ s⁻² and S² = (8.94 / 304.8)² = 8.604 × 10⁻⁴ s⁻². The Richardson number is 0.259, just above the critical value of 0.25. A wind difference of about 20.3 mph would lower it to 0.25.

Why it matters

The Richardson number is a standard tool for the study of turbulence in the atmosphere and the ocean. It helps to forecast clear-air turbulence for aircraft, to understand mixing in the boundary layer and in estuaries, and to tell if a layer of fog or smoke will mix or stay put. It links the profiles of temperature and wind in one number.

Good to know

The gradient number is defined for local gradients, but the calculator uses the finite difference between two levels, which smooths the profile and hides thin, strong layers of shear. The value 0.25 comes from linear theory for an inviscid parallel flow, and real turbulence can occur outside it. The temperatures must be potential temperatures. Treat the result as a guide.

The potential temperature calculator converts air temperature into θ, the wind shear power law calculator extrapolates wind with height, the Froude number calculator compares inertia with gravity, and the Reynolds number calculator compares inertia with viscosity.

Frequently asked questions

What does the Richardson number tell us?

It compares the stabilising effect of buoyancy with the destabilising effect of wind shear. When it is large, a stable layer stays smooth. When it falls below a critical value, the shear can overcome the stability and make turbulence, such as Kelvin–Helmholtz waves. The number is used in meteorology, oceanography and fluid dynamics.

What is the critical value?

The classic result of linear theory is 0.25: below it, a stratified shear flow can be unstable. In practice, turbulence can persist up to about 1, since turbulence that already exists is not stopped at once. For this reason forecasters of clear-air turbulence for aircraft watch for Richardson numbers below 0.25 to 1 and warn of possible turbulence.

Why can the number be negative?

If the potential temperature decreases with height, the layer is unstable and N² is negative. Then buoyancy adds to the shear in making turbulence, and Ri is negative. Such cases are found in a hot boundary layer on a sunny afternoon, with thermals that mix the air strongly. The calculator shows these results with a warning.

How do I use it for aviation or wind power?

Pilots, forecasters and wind-farm designers use the Richardson number to see if the air near a jet stream, a mountain or a low-level jet is likely to be turbulent. Wind turbines react to the shear and the turbulence in the layer of the rotor, which depend on this ratio. A thin layer gives a large local Ri, so use data from several levels.

Was this calculator helpful?

Thanks for your feedback!

Results are estimates provided for information purposes. They do not replace professional advice.