Skip to content
Omnikalc

What size heater does my aquarium need?

Enter the tank volume, the room temperature, the target water temperature, the share of time the heater runs and the electricity price: get the watts needed, the heater size to buy, the size of each heater if you use two, and the cost per month.

Updated on
Your inputs
gal

Value out of range

°F

Value out of range

°F

Value out of range

%

Value out of range

$/kWh

Value out of range

Results

Heating power needed

120 W

Heater size to buy

125 W

Each of two heaters
75 W
Cost per month
$4.41
A lid cuts heat loss a lot; in a large tank or a cold room, two smaller heaters at each end spread the heat and limit the risk if one sticks on, and an external controller adds another safety

Most tropical fish need water between 75 and 80°F, warmer than a typical living room. An aquarium heater keeps the water stable, and the right size depends on the tank volume and the gap between room and water temperature. Too small a heater runs all the time and cannot keep up in winter; a much oversized one can overheat the tank if its thermostat fails. This calculator works out the watts needed, the heater size to buy, the size of each heater if you use two, and the cost per month.

How the calculation works

  • Temperature rise = target water temperature − room temperature
  • Heating power = volume × temperature rise × 0.4 W per gallon per °F
  • Heater size = heating power rounded up to the next 25 W
  • Each of two heaters = half the power, rounded up to the next 25 W
  • Cost per month = heating power × 24 h × share of time on × 30 days ÷ 1,000 × price per kWh

A 30 gal tank in a 68°F room, kept at 78°F, needs about 120 W. Buy a 125 W heater, or two 75 W heaters. If it runs 30% of the time at $0.17 per kWh, it costs about $4.41 a month.

Rule of thumb

Temperature rise Watts per gallon
5°F about 2 W
10°F about 4 W
15°F about 6 W
20°F about 8 W

Choosing a heater

  • Submersible heaters with an adjustable thermostat are the most common.
  • Titanium heaters are hard to break and suit large or rough tanks.
  • Inline heaters sit on the filter tubing outside the tank, out of reach of large fish.
  • An external controller switches the heater off if the water gets too warm.

Placement and safety

Put the heater near the filter outflow so warm water spreads evenly, and fully submerge it unless the label says otherwise. Unplug it for 15 minutes before taking it out of the water, and keep a thermometer at the far end of the tank to check the temperature. A lid and a stable room temperature cut both heat loss and running cost.

Frequently asked questions

What size heater for a 30 gallon tank?

About 120 W to raise the water 10°F, so buy a 125 W heater or two 75 W heaters.

How many watts per gallon for an aquarium heater?

About 4 W per gallon for a 10°F rise, 6 W for 15°F.

How much does an aquarium heater cost to run?

About $4.41 a month for 120 W running 30% of the time at $0.17 per kWh.

Should I use two aquarium heaters?

In large tanks or cold rooms, two smaller heaters spread heat and limit the risk if one fails.

Was this calculator helpful?

Thanks for your feedback!

Results are estimates provided for information purposes. They do not replace professional advice.