A saltwater aquarium needs new saltwater for every water change, mixed from fresh RO/DI water and a synthetic sea salt. Knowing how much salt each change uses helps you buy the right bucket size and keep salinity stable. This calculator works out the volume of each change, the salt it needs, the salt to fill the tank and how long a bucket lasts.
How the calculation works
- New saltwater per change = tank volume × water change share
- Salt per change = change volume × salt per gallon × target salinity ÷ 35 ÷ 16
- Salt to fill the tank = tank volume × salt per gallon × target salinity ÷ 35 ÷ 16
- Bucket lasts = bucket weight ÷ salt per change, rounded down, × weeks between changes
A 75 gal reef tank with 20% water changes needs 15 gal of new saltwater each time. At about 4.8 oz of salt mix per gallon for 35 ppt, each change uses about 4.5 lb of salt. Filling the tank from scratch takes about 22.5 lb, and with weekly changes, a 50 lb bucket lasts about 11 weeks.
Salinity targets
| Tank | Salinity | Specific gravity at 77°F |
|---|---|---|
| Reef | 35 ppt | about 1.026 |
| Fish only | 30 to 33 ppt | 1.022 to 1.025 |
| Brackish | 10 to 20 ppt | 1.008 to 1.015 |
Check the salt maker’s instructions: brands differ slightly in how much mix gives 35 ppt.
Mixing tips
- Use RO/DI water; tap water can carry nitrates, phosphates and copper.
- Add salt to water, not water to salt, with a pump running.
- Heat to tank temperature and circulate for 12 to 24 hours before use.
- Measure with a calibrated refractometer; adjust with more salt or fresh water.
- Top off evaporation with fresh water only, since the salt stays in the tank.
- Store dry salt sealed, as it absorbs moisture and clumps.