An aquarium costs more to run than many owners expect: the heater, filter and lights run every day of the year, and food and supplies add up. This calculator estimates the monthly and yearly cost from the power of each device and your electricity price.
How the calculation works
Daily energy is the sum of the three loads, in watt-hours, divided by 1,000:
- Heater: power × share of the time it runs × 24 h. A 100 W heater running 40% of the time uses 100 × 0.4 × 24 = 960 Wh a day.
- Filter and pump: they run all day, so 10 W × 24 h = 240 Wh.
- Lighting: 20 W for 8 h = 160 Wh.
That gives 1.36 kWh a day, or about 41.4 kWh a month (365 ÷ 12 days). At $0.17 per kWh, electricity costs about $7.03 a month. With $10 of food, water conditioner and filter media, the total is about $17 a month, or $204 a year.
What drives the cost
- The heater, by far, in a tropical tank. Its running time depends on the gap between room and water temperature. A tank in a cool room in winter may heat most of the time.
- Tank size: more water means a bigger heater and more filtration.
- Lighting: planted tanks and reef tanks use stronger lights for longer.
- Coldwater tanks need no heater and cost much less to run.
Estimating the heater’s running time
A common rule is about 3 to 5 W of heater per gallon. If you have a plug-in energy meter, measure the heater over a few days for an accurate figure. Otherwise, try 20 to 30% for a warm room and 40 to 60% for a cool room.
Ways to save
- A lid or cover reduces evaporation and heat loss.
- Keep the tank away from cold windows and outside walls.
- LED lighting uses far less than older fluorescent tubes.
- A timer keeps lighting to a steady 6 to 10 hours, which also limits algae.
- Buy supplies in bulk, and avoid overfeeding, which wastes food and dirties the water.
Remember the setup cost too: tank, stand, equipment and fish are a separate one-time expense.