Skip to content
Omnikalc

How much water should I change in my aquarium?

Work out the water to change each week, the water conditioner dose, the buckets to carry and the nitrate level your routine keeps the tank at.

Updated on
Your inputs
gal

Value out of range

%

Value out of range

mL per 10 gal

Value out of range

gal

Value out of range

ppm

Value out of range

Results

Water to change

5.0 gal

Conditioner for the new water

0.5 mL

Bucket trips
3
Nitrate just before each change
40 ppm
Acceptable for many freshwater fish; lower is better
Water changed per year
260 gal

Regular partial water changes are the single most important habit for a healthy aquarium. They dilute nitrate and other waste, replace minerals and keep water chemistry stable. This calculator works out how much water to change, how much conditioner to add, how many buckets to carry and what nitrate level your routine maintains.

How much to change

Many freshwater keepers change about 10 to 30% of the water every week. In a 20 gallon tank, a 25% change is 5 gallons, or 3 trips with a 2 gallon bucket. Over a year that adds up to 260 gallons.

Water conditioner

Tap water often contains chlorine or chloramine, which harm fish and the beneficial bacteria in the filter. Treat the new water with a conditioner before or as you add it. Dosing varies by product, so read the label. At 1 mL per 10 gallons, 5 gallons of new water needs 0.5 mL. Some keepers dose for the whole tank volume when using chloramine-treated water; follow the product directions.

Nitrate balance

Fish waste and uneaten food break down into nitrate, which builds up between changes. If nitrate rises about 10 ppm a week and you replace 25% of the water weekly, it settles at a level where each change removes as much as builds up: about 10 ÷ 0.25 = 40 ppm just before each change and 30 ppm just after.

Many keepers aim to keep nitrate below about 20 to 40 ppm for freshwater fish; sensitive species and shrimp prefer lower. Test with a nitrate kit to find your tank’s weekly rise.

To lower nitrate, change more water, feed less, avoid overstocking or add live plants.

Water change tips

  • Match the temperature of the new water to the tank within a degree or two.
  • Use a gravel vacuum to remove waste from the substrate as you drain.
  • Keep buckets just for the aquarium, never used with soap or chemicals.
  • Do not clean the filter media in tap water; rinse it in removed tank water to protect the bacteria.
  • Be consistent: smaller regular changes are gentler than occasional large ones.
  • Unplug heaters and filters while the water level is low.

Saltwater tanks need premixed salt water at the right salinity, prepared in advance.

Frequently asked questions

How much water should I change in my aquarium?

Many keepers change about 10 to 30% weekly. In a 20 gallon tank, 25% is 5 gallons.

Do I need water conditioner for water changes?

Yes, if your tap water contains chlorine or chloramine. Treat the new water and follow the product's dose.

What nitrate level is safe for fish?

Many keepers aim for below about 20 to 40 ppm for freshwater fish; sensitive species prefer lower.

Can I change too much water at once?

Large changes can shock fish if temperature or chemistry differ. Regular moderate changes are safer.

Was this calculator helpful?

Thanks for your feedback!

Results are estimates provided for information purposes. They do not replace professional advice.