Skip to content
Omnikalc

Reef salt mix calculator: how much salt for your saltwater aquarium?

Enter the water volume, the target salinity and the current salinity to get the salt mix needed, the salt per gallon, the specific gravity and the fresh water to add.

Updated on
Your inputs

Value out of range

ppt

Value out of range

ppt

Value out of range

Results

Salt mix needed

14.94 lb

Salt mix per gallon of water
4.78 oz/gal
Specific gravity at the target salinity (25 °C reference)
1.0263
Fresh water to add to reach the target salinity
2.86 gal

A saltwater aquarium needs the right amount of salt in the water. The reef salt mix calculator takes the water volume, the target salinity and the current salinity, and gives the salt mix needed, the salt per gallon of mixed water, the specific gravity at the target and the fresh water to add when the tank has become too salty.

How the calculation works

  • Seawater at salinity S (in parts per thousand, g of salt per kg of water) has a density near 0.99705 × (1 + 0.000751 × S) kg per liter at 25 °C.
  • Salt per liter of mixed water = S × density. At 35 ppt this is about 35.8 g per liter, or 4.78 oz per gallon.
  • Salt mix needed = water volume × salt per liter. Convert grams to pounds by dividing by 453.6.
  • To lower a salinity that has risen through evaporation, the fresh water to add is (current ÷ target − 1) × volume, ignoring small changes in density.

Example

A 50-gallon tank (189.3 liters) is mixed to 35 ppt. The density is 0.99705 × (1 + 0.000751 × 35) = 1.0233, so each liter needs about 35.8 g of salt, or 4.78 oz per gallon. The tank needs 14.94 lb of salt mix. The specific gravity at 35 ppt is about 1.0263. If the tank has risen to 37 ppt, adding about 2.86 gallons of fresh water brings it back to 35 ppt.

Why it matters

Too much or too little salt stresses fish and corals, and mixing by guess leads to swings every water change. The calculator gives the quantity for the first fill, for a water change and for correcting a salinity that has drifted.

Good to know

The calculation treats the mix as pure dissolved salt in water at 25 °C, so real brands may give a slightly different result and a measurement is needed to confirm. The correction for a high salinity ignores small changes in volume. When you correct salinity, change it slowly, by no more than about 1 ppt a day.

The aquarium calculator gives the volume of a tank, the aquarium water change calculator plans a water change and the brine calculator mixes salt solutions for food.

Frequently asked questions

What salinity should a reef tank have?

Most reef aquariums are kept at 33 to 36 ppt, with 35 ppt as the usual target, which matches natural seawater. Fish-only tanks are sometimes kept lower, and some keepers use 32 to 34 ppt for fish. Keep the value stable, since changes of more than 1 ppt a day stress animals.

Why is the salinity rising when I only add water?

Water evaporates, but salt does not. If you replace evaporated water with a salt mix, the salinity rises over time. Top off with fresh, purified water to replace evaporation, and use the salt mix only for water changes.

Should I measure with a refractometer or a hydrometer?

A refractometer made for seawater, calibrated with a 35 ppt reference solution, is more accurate than a floating swing-arm hydrometer. Whichever you use, calibrate it often and measure at the same temperature, since density changes with the temperature of the water.

Does every salt brand mix the same?

No. Brands differ in how much of the dry weight dissolves, in the other elements they contain and in the recommended quantity per gallon. Use this calculator for the amount of dissolved salt, then check the first batch with a refractometer and adjust to the brand you use.

Was this calculator helpful?

Thanks for your feedback!

Results are estimates provided for information purposes. They do not replace professional advice.