When two sound waves of nearly the same frequency are heard together, they alternately reinforce and cancel each other, so the loudness rises and falls in a regular pulse. These pulses are called beats, and their rate equals the difference between the two frequencies. Musicians use this effect to tune instruments, and engineers use it to compare frequencies very precisely. This calculator gives the beat frequency, the time between beats and the average pitch you perceive.
How the calculation works
- Beat frequency = |f₁ − f₂|
- Time between beats = 1 ÷ beat frequency
- Perceived pitch = (f₁ + f₂) ÷ 2
- Interval = 1200 × log₂(higher ÷ lower), in cents
Example
Two tones of 440 Hz and 444 Hz sounding together produce 4 beats each second, or 240 per minute, one every 0.25 s. The pitch you hear is about 442 Hz, and the difference between the tones is 15.67 cents, less than a sixth of a semitone.
Tuning by beats
To tune a string to a reference, play both at once and listen to the pulsing. Fast beats mean the pitch is far off; adjust the string until the beats slow, then stop. For two strings tuned to a unison, you should aim for no beating at all. In some intervals, such as a fifth on a piano, a slight slow beat is deliberate, a part of equal temperament.
Limits of the effect
Beats are heard clearly only when the difference is small, below about 7 Hz. Between roughly 15 and 30 Hz the sound becomes rough, and beyond that the ear separates two tones. In the same way, beats exist for any waves, such as light, radio or water, whenever two nearby frequencies are combined.
Beats in other fields
The same idea is used in electronics, where mixing two radio signals produces a difference frequency that is easier to process, and in medicine, where Doppler devices compare an emitted frequency with the echo. Pilots of twin-engine propeller planes sometimes hear slow beats when the two engines run at slightly different speeds, and they adjust the throttles until the pulsing stops.