Skip to content
Omnikalc

Plasma frequency calculator: which waves can pass through a plasma?

Enter the electron density and temperature of a plasma to get the plasma frequency, the angular frequency, the corresponding wavelength and the Debye length.

Updated on
Your inputs

Value out of range

eV

Value out of range

Results

Plasma frequency

8.979 MHz

Angular plasma frequency
56.41 Mrad/s
Wavelength of the plasma frequency
33.3894 m
Debye length
2.351 mm

The electrons of a plasma oscillate at a frequency that depends only on their density. The plasma frequency calculator gives this plasma frequency from the electron density, and also the angular frequency, the wavelength and the Debye length with the electron temperature. It tells which radio waves a plasma will reflect.

How the calculation works

  • Enter the electron density as a power of ten per cubic meter (for example 12 for 10¹² electrons per m³) and the electron temperature in electron volts.
  • The plasma frequency is ωp = √(n e² / (ε₀ mₑ)), and f = ωp / 2π, close to 8.98 √n hertz with n in m⁻³.
  • Electromagnetic waves with a frequency below fp cannot propagate in the plasma and are reflected.
  • The Debye length λD = √(ε₀ k T / (n e²)) is the distance over which the plasma screens an electric charge.

Example

The F2 layer of the ionosphere has an electron density of about 10¹² per m³ and a temperature of about 0.1 eV. The plasma frequency is 8.98 MHz, a wavelength of 33.4 m. HF radio waves below about 9 MHz sent upward are reflected, and above it they pass through to space. The Debye length is 2.35 mm.

Why it matters

The plasma frequency explains radio propagation with the ionosphere, the reflectivity of metals, the shielding of spacecraft re-entering the atmosphere and the diagnostics of fusion and discharge plasmas. It is a basic parameter of every plasma, from the solar wind to a neon lamp.

Good to know

The calculator treats a cold, unmagnetized, collisionless plasma, with fixed ions, and a non-relativistic electron motion. A magnetic field (as in the ionosphere), collisions and a high temperature change the cut-off and add modes of propagation. The density is entered as a power of ten, so a value of 12.5 is about 3.2 × 10¹² per m³.

The electromagnetic wave intensity calculator covers the waves that are reflected or passed, the Debye length calculator covers the screening in electrolytes, the Larmor frequency calculator covers the gyration in a magnetic field, and the Lorentz force calculator covers the motion of charges.

Frequently asked questions

What is the plasma frequency?

It is the natural frequency at which the electrons of a plasma oscillate when they are displaced from the heavier ions. The electric field of the separated charges pulls them back, and they overshoot, like a mass on a spring. The frequency depends only on the electron density: fp ≈ 8.98 √n Hz.

Why do waves below it not propagate?

At a frequency below fp, the electrons respond fast enough to cancel the electric field of the wave, so the wave is reflected. Above fp, the electrons cannot follow, and the wave goes through. This is why short waves bounce off the ionosphere (and AM radio travels far at night), while FM and television signals go through to space.

What about metals?

In a metal, the free electrons form a plasma of very high density, about 10²⁸ to 10²⁹ per m³. The plasma frequency is then in the ultraviolet (around 10¹⁵ to 10¹⁶ Hz). Below it, light is reflected, which is why metals are shiny, and above it the metal becomes transparent.

What is the Debye length?

It is the distance over which the free charges of a plasma screen the field of a single charge. A plasma is a collection of many charges at distances larger than the Debye length, in which the charge is neutral overall. A medium that is smaller than this length is not a plasma. It is the plasma analog of the Debye length of an electrolyte.

Was this calculator helpful?

Thanks for your feedback!

Results are estimates provided for information purposes. They do not replace professional advice.