Skip to content
Omnikalc

Cell resuspension calculator: how much suspension and medium to seed your plate?

Enter the cell count, the volume, the viability and the seeding plan to get the volume of suspension to use, the medium to add and the number of wells you could seed.

Updated on
Your inputs
million/mL

Value out of range

mL

Value out of range

%

Value out of range

Value out of range

Value out of range

µL

Value out of range

Results

Volume of suspension to use

1.04 mL

Enough cells
Live cells in the suspension
9.20 million
Live cells needed
1.92 million
Final volume to prepare
9.60 mL
Medium to add
8.56 mL
Wells you could seed
460

Seeding a plate with the right number of cells begins with a simple calculation after counting. This cell resuspension calculator takes the cell concentration, the volume, the viability and your seeding plan to give the volume of suspension to use, the medium to add, the final volume and the number of wells you could seed.

How the calculation works

  • Live cells = concentration × volume × viability. A count of 2 million cells per milliliter in 5 mL with 92% viability gives 9.2 million live cells.
  • Cells needed = cells per well × number of wells. For 96 wells at 20,000 cells, that is 1.92 million.
  • Volume of suspension = cells needed ÷ (concentration × viability). It is the amount to take from the stock.
  • Medium to add = final volume of the plate (wells × volume per well) − the volume of suspension, which gives the dilution to a seeding mix.

Example

A suspension has 2.0 million cells/mL in 5 mL, with 92% viability, so there are 2 × 5 × 0.92 = 9.2 million live cells. You want to seed 96 wells with 20,000 cells in 100 µL. You need 96 × 20,000 = 1.92 million cells, which is 1.92 ÷ 1.84 = 1.04 mL of the suspension. The final volume is 96 × 0.1 = 9.6 mL, so you add 8.56 mL of medium. The suspension would be enough for 460 wells.

Why it matters

Researchers, technicians and students use it every time they plate cells, passage a culture or set up an assay. An even density from well to well is essential for reproducible results, and a quick calculation avoids mistakes in the dilution.

Good to know

The calculation assumes that the cells are evenly mixed and that the count is accurate. Counting errors, clumps of cells and uneven mixing change the real density, and the volume of the cell pellet is ignored. The calculator is a planning aid for general laboratory work, and it does not replace your protocol, your validated procedures or the guidance of your lab. Work with the safety rules that apply to the cells and reagents you use.

The dilution calculator mixes stock and diluent, the serial dilution calculator plans a series of steps and the cell doubling time calculator follows growth.

Frequently asked questions

How do I count the cells?

Mix a sample of the suspension with a dye such as trypan blue and count the cells in a counting chamber or with an automated counter. The result is in cells per milliliter, and the dye lets you tell the live cells from the dead ones, which gives the viability. Count at least a few hundred cells for a steady figure.

Why use the viability?

Only live cells attach and grow, so the number of cells you need is the live count. Taking viability into account avoids seeding too few cells when the culture is not fully healthy. It is common to seed on the live cell count and not on the total count.

Why prepare a bit more than the total?

Pipetting wastes some liquid in the tips, the reservoir and the tubes, and some mixes lose a little at each step. Many labs prepare 10 to 20% more than the final volume. You can add this extra by entering one or two more wells in the calculator.

What if I need more cells than I have?

The calculator marks the result in red when the volume of suspension needed is larger than what you have. Then you can reduce the cells per well, seed fewer wells or grow the culture longer. Check the units, since a mistake of a factor of 10 or 1,000 in a count is common.

Was this calculator helpful?

Thanks for your feedback!

Results are estimates provided for information purposes. They do not replace professional advice.