Skip to content
Omnikalc

Hemocytometer cell count calculator: cells per mL and viability

Enter the live and dead cells counted, the number of squares and the dilution to get viable cells per mL, the viability and the total cells in your suspension.

Updated on
Your inputs

Value out of range

Value out of range

Value out of range

Value out of range

mL

Value out of range

Results

Viable cells per mL

930,000

Cell viability
93.0 %
Healthy culture: viability of 90 % or more
Total cells per mL (live and dead)
1,000,000
Total viable cells in the suspension
9,300,000

Before seeding a plate or passaging a culture, you need to know how many live cells you have. The hemocytometer cell count calculator takes the live and dead counts, the number of squares, the dilution factor and the suspension volume, and gives the viable cells per mL, the viability, the total cells per mL and the total viable cells.

How the calculation works

  • Mix the cell suspension with trypan blue and load a hemocytometer. Count the live (unstained) and dead (blue) cells in a number of large squares.
  • Enter both counts, the number of large squares and the dilution factor. A 1:1 mix with trypan blue has a dilution factor of 2.
  • Each large square holds 0.1 µL (1 mm × 1 mm × 0.1 mm). Cells per mL = cells per square × dilution factor × 10⁴.
  • Viability = live ÷ (live + dead). The total viable cells in the suspension are the viable cells per mL times its volume.

Example

You count 186 live and 14 dead cells in 4 large squares after a 1:1 mix with trypan blue. Viable cells per mL are 186 ÷ 4 × 2 × 10⁴ = 9.3 × 10⁵, and the viability is 186 ÷ 200 = 93 %. A 10 mL suspension holds 9.3 × 10⁶ viable cells.

Why it matters

Cell culture work from routine passaging to transfection and drug assays depends on seeding the right density. A clear calculation of the concentration and the viability avoids wasted experiments.

Good to know

Counts are affected by clumping, uneven loading and the number of squares. Gently mix the sample, load the chamber properly and count promptly after staining, since trypan blue becomes toxic over time and raises the dead count.

The cell doubling time calculator predicts growth, and the dilution calculator helps you reach the seeding density.

Frequently asked questions

Why multiply by 10,000?

A large square of a standard hemocytometer holds 0.1 microliter, so the count per square is per 0.1 µL. Multiplying by 10⁴ converts the count to cells per milliliter, because 1 mL is 10,000 times 0.1 µL.

How many squares should I count?

Count enough squares to reach at least 100 to 200 cells in total, because a higher count has a smaller relative error. If the concentration is high, dilute the sample before counting. Most protocols count four corner squares.

How does trypan blue reveal dead cells?

Live cells with an intact membrane exclude the dye and stay clear, while dead cells with a damaged membrane take it up and turn blue. Count the blue cells as dead and the others as live.

Should I include the dilution from the dye?

Yes. If you mix equal volumes of cell suspension and trypan blue, the cells are diluted by half, so the dilution factor is 2. Add any other dilution made before staining.

Was this calculator helpful?

Thanks for your feedback!

Results are estimates provided for information purposes. They do not replace professional advice.