Skip to content
Omnikalc

Clock jitter SNR calculator

Enter the signal frequency, the rms clock jitter and the converter resolution to get the SNR limit due to jitter, the effective number of bits and the maximum jitter that keeps the full resolution.

Updated on
Your inputs
MHz

Value out of range

ps

Value out of range

bits

Value out of range

Results

SNR limit due to jitter

64.04 dB

Effective bits limited by jitter
10.34
Maximum jitter for the full resolution
0.318 ps
SNR with jitter and quantization
63.62 dB
Resulting effective bits
10.28
Jitter costs more than one bit of resolution
Ideal SNR of the converter (quantization)
74.00 dB

The clock jitter SNR calculator gives the SNR limit set by sampling clock jitter, the effective number of bits and the maximum jitter that preserves the full resolution of an analog-to-digital converter.

How the calculation works

  • Enter the signal frequency and the rms jitter.
  • Enter the resolution of the converter.
  • The calculator gives the SNR due to jitter, the effective bits, the maximum jitter, the combined SNR and the resulting bits.

Example

A 100 MHz signal with 1 ps rms jitter has 2π × 10⁸ × 10⁻¹² = 6.28 × 10⁻⁴, so an SNR limit of 64.04 dB, or 10.34 effective bits. A 12-bit converter, ideal SNR 74.00 dB, needs jitter below 0.318 ps. Combined with quantization noise, the SNR is 63.62 dB and the resolution falls to 10.28 bits.

Why it matters

The calculator helps engineers who design data acquisition, radio receivers or audio converters, and who must choose a clock source for a given signal frequency and resolution.

Good to know

The jitter considered here is the rms value of the random timing error of the sampling clock, including the converter’s own aperture jitter. Phase noise of the clock can be integrated over the relevant bandwidth to obtain this value. The formula assumes a full-scale sine wave, and a smaller signal is less sensitive to jitter. It also treats jitter as white, and low-frequency jitter has a smaller effect on a narrowband signal. For audio frequencies, the requirement is easy to meet, whereas undersampling a signal at hundreds of megahertz is demanding. When the sum of two noise sources is needed, powers are added, not decibels.

The ADC resolution calculator covers quantization, the Nyquist sampling calculator relates sampling and bandwidth, the PLL frequency synthesizer calculator describes clock generation and the SNR calculator converts ratios.

Frequently asked questions

Why does jitter limit the SNR?

If the sampling instant is wrong by a small time error, the sample takes a wrong value, with an error proportional to the slope of the signal. A fast signal changes more in the same time, so the error rises with the frequency. The limit is SNR = −20 log10(2π f σ).

How are bits and SNR related?

An ideal converter with N bits has an SNR of 6.02 N + 1.76 dB for a full-scale sine wave. Inverting this formula gives the effective number of bits from a measured SNR. Each lost 6 dB costs one bit.

What jitter is typical?

A crystal oscillator gives well under a picosecond, a good phase-locked loop clock about 0.1 to 1 ps, and a noisy digital clock 10 ps or more. For high-frequency inputs, only a very clean clock allows the full resolution.

Was this calculator helpful?

Thanks for your feedback!

Results are estimates provided for information purposes. They do not replace professional advice.