Skip to content
Omnikalc

Enzyme activity calculator: how many units and what specific activity?

Enter the absorbance change, extinction coefficient, volumes, dilution and protein content to get enzyme activity in U/mL and specific activity in U/mg.

Updated on
Your inputs

Value out of range

mM⁻¹ cm⁻¹

Value out of range

cm

Value out of range

mL

Value out of range

mL

Value out of range

Value out of range

mg/mL

Value out of range

Results

Specific activity

25.12 U/mg

Enzyme activity in the sample
20.10 U/mL
Activity in the cuvette
0.0402 U
Reaction rate
0.0402 mM/min
Activity in katal per millilitre
0.3349 µkat/mL

Biochemists express how much enzyme they have in units, not in milligrams. The enzyme activity calculator turns a measured absorbance change per minute into enzyme activity with the extinction coefficient, the path length, the reaction and sample volumes, the dilution factor and the protein concentration. It gives the specific activity, the activity per millilitre, the activity in the cuvette, the reaction rate and the activity in katal.

How the calculation works

  • Enter the change in absorbance per minute (ΔA/min) you measured on the linear part of the progress curve.
  • Enter the molar extinction coefficient of the product at your wavelength, for example 6.22 mM⁻¹ cm⁻¹ for NADH at 340 nm, and the path length of the cuvette.
  • Enter the total reaction volume, the volume of enzyme sample you added and its dilution factor if you diluted it.
  • Enter the protein concentration of the undiluted sample to get the specific activity in units per milligram.

Example

A reaction with NADH gives ΔA/min = 0.25 in a 1 cm cuvette with ε = 6.22 mM⁻¹ cm⁻¹. The rate is 0.25 ÷ 6.22 = 0.0402 mM/min. In 1.0 mL that is 0.0402 U. The sample was diluted 10 times and 0.02 mL was added, so the activity of the undiluted sample is 0.0402 × 10 ÷ 0.02 = 20.1 U/mL. With 0.8 mg/mL protein, the specific activity is 25.1 U/mg, or 0.335 µkat/mL.

Why it matters

Activity and specific activity are the numbers used to compare preparations, follow a purification, and report the amount of enzyme in a kit or experiment. Doing the unit conversions by hand is a common source of errors in volumes and dilutions.

Good to know

The result assumes that the absorbance change comes from one product with a known extinction coefficient, that the rate is linear, and that the path length and volumes are accurate. It ignores background reactions, which should be subtracted with a blank, and inhibitors in the sample. Conditions of temperature and pH must be reported with the activity.

The Michaelis-Menten calculator models how the rate depends on substrate, the Beer-Lambert calculator links absorbance to concentration, and the dilution calculator prepares the samples.

Frequently asked questions

What is an enzyme unit?

One international unit (U) is the amount of enzyme that converts 1 micromole of substrate to product per minute under the stated conditions of temperature, pH and substrate concentration. The SI unit is the katal, equal to 1 mole per second, so 1 U is 16.67 nanokatal.

What is specific activity?

Specific activity is the enzyme activity per milligram of total protein, in U/mg. It is a measure of purity: as you purify an enzyme the specific activity rises, because a bigger share of the protein is the enzyme you want.

How do I choose the extinction coefficient?

It depends on the molecule you follow and the wavelength. NADH and NADPH have 6.22 mM⁻¹ cm⁻¹ at 340 nm, and p-nitrophenol has about 18.3 mM⁻¹ cm⁻¹ at 405 nm in basic buffer. Use the value for your buffer and pH from a reliable source, or measure it with a standard curve.

Why use the linear part of the curve?

The rate is only valid as an initial rate, when little substrate has been used and the product does not slow the reaction. Use the steepest linear part of the curve, and dilute the enzyme if the reaction is too fast so that the absorbance changes by less than about 0.1 to 0.3 per minute.

Was this calculator helpful?

Thanks for your feedback!

Results are estimates provided for information purposes. They do not replace professional advice.