Skip to content
Omnikalc

Fabry–Perot etalon calculator: the resolution of an optical cavity

Enter the cavity length, the refractive index, the mirror reflectivity and the wavelength to get the free spectral range, the finesse, the linewidth and the resolving power.

Updated on
Your inputs
mm

Value out of range

Value out of range

%

Value out of range

nm

Value out of range

Results

Free spectral range

14.99 GHz

Free spectral range in wavelength
0.02003 nm
Finesse
61.2
Linewidth of a transmission peak
244.8 MHz
Resolving power ν/δν
1.935 million

Two parallel mirrors can filter light with extreme precision. The Fabry–Perot etalon calculator gives the free spectral range, the finesse, the linewidth of the transmission peaks and the resolving power of a cavity, from its length, its refractive index, the reflectivity of its mirrors and the wavelength.

How the calculation works

  • Enter the length of the cavity (the distance between the two mirrors), the refractive index of the medium inside, the reflectivity of the mirrors and the wavelength.
  • The spacing between two transmission peaks is the free spectral range, FSR = c / (2 n L).
  • The finesse depends only on the mirrors: F = π √R / (1 − R).
  • The linewidth of a peak is FSR / F, and the resolving power is the optical frequency divided by this linewidth.

Example

An air gap of 10 mm between two mirrors with 95 % reflectivity is lit with a helium-neon laser at 633 nm. The free spectral range is 14.99 GHz, which is 0.02003 nm in wavelength. The finesse is 61.2, so each peak has a linewidth of 244.8 MHz, and the resolving power is about 1.935 million.

Why it matters

The Fabry–Perot cavity is one of the most important instruments in optics. The calculator shows the trade-off between the spacing of the peaks, which sets the range without ambiguity, and their width, which sets the resolution, and it helps choose the length and the mirrors of a spectrometer, a filter or a laser cavity.

Good to know

The formulas are for an ideal etalon at normal incidence, with parallel flat mirrors of the same reflectivity and no loss in the mirrors or in the medium. In practice, the finesse is limited by the flatness and parallelism of the mirrors, by the absorption and scattering, and by the divergence of the beam. The refractive index is taken as constant, without dispersion, and the real finesse is usually lower than the reflectivity finesse given here.

The refraction calculator gives the speed of light in the medium of the cavity, the wavelength calculator converts between wavelength and frequency, the numerical aperture calculator covers the light-gathering angle of the optics, and the telescope resolution calculator covers the angular resolution of an instrument.

Frequently asked questions

What is a Fabry–Perot etalon?

It is a cavity made of two parallel, partly reflecting mirrors. Light is transmitted only when a whole number of half wavelengths fits between the mirrors, so the transmission has a series of narrow, equally spaced peaks. An etalon is a Fabry–Perot cavity with a fixed spacing, usually a plate of glass or silica with coated faces.

What is the free spectral range?

It is the distance between two consecutive transmission peaks, in frequency, FSR = c / (2 n L). A longer cavity gives a smaller FSR and more closely spaced peaks. The FSR is also the largest spectral range that an etalon can analyze without overlap between orders, so a high-resolution instrument must have a large FSR and a large finesse.

What is the finesse?

It is the ratio of the free spectral range to the linewidth of a peak. It depends only on the reflectivity of the mirrors, F = π √R / (1 − R). With R = 95 % the finesse is 61, with R = 99 % it is 312, and with R = 99.99 % it is more than 31,000. A high finesse gives sharp peaks and a long photon lifetime in the cavity.

Where is it used?

Fabry–Perot cavities are the heart of lasers, of tunable optical filters in telecommunications, of spectrometers for astronomy and plasma physics, and of the interferometers that measure gravitational waves. The thin etalon in a single-mode laser selects one longitudinal mode.

Was this calculator helpful?

Thanks for your feedback!

Results are estimates provided for information purposes. They do not replace professional advice.