Skip to content
Omnikalc

Flight fuel planning calculator

Enter the flight time, the fuel burn, the reserve rule, the alternate time and the taxi fuel to get the fuel required for the flight, the fuel to uplift and the endurance left at landing.

Updated on
Your inputs
h

Value out of range

gal/h

Value out of range

min

Value out of range

gal

Value out of range

gal

Value out of range

Results

Total fuel required

33.2 gal

Fuel left after the planned requirement

6.8 gal

Trip fuel
23.8 gal
Final reserve fuel
4.8 gal
Alternate fuel
3.2 gal
Total endurance of the fuel on board
4.05 h
Extra flying time available
43 min

The flight fuel planning calculator adds the trip fuel, the final reserve, the alternate fuel and the taxi fuel into the total fuel required, and shows what is left in the tanks and the extra flying time available.

How the calculation works

  • Enter the flight time and the fuel burn per hour.
  • Choose the reserve rule, and enter the time to the alternate and the taxi fuel.
  • Enter the usable fuel on board and read the total and the fuel left.

Example

A flight of 2.5 h at 9.5 gal/h burns 23.8 gal. The final reserve (30) adds 4.8 gal, the alternate adds 3.2 gal and the taxi 1.5 gal. The total required is 33.2 gal. With 40 gal usable on board, 6.8 gal remain, which is 43 min of extra flying time. The tanks give an endurance of 4.05 h.

Why it matters

The calculator helps private pilots, students and flight planners check quickly that a flight carries enough fuel with its reserves, compare the effect of the reserve rule, and see how much margin is left before loading the aircraft.

Good to know

Use the real fuel burn of the aircraft at the planned settings, and the usable fuel from the manual. The flight time must include the climb and the wind of the day. Reserves are a legal minimum and not a target: many pilots plan more on long legs or in bad weather. Your national regulation sets the exact reserve and alternate rules, and these figures are for planning only. Compare the result with the fuel gauges and a visual check of the tanks before every departure, and keep a written record of the fuel on board at each stop.

The fuel consumption calculator handles road trips, the wind triangle calculator gives the ground speed, the top of descent calculator plans the descent and the density altitude calculator shows engine performance.

Frequently asked questions

How much fuel must a flight carry?

The fuel required is the sum of the taxi fuel, the trip fuel, the fuel to reach an alternate if needed, and the final reserve. Many regulations set a final reserve of 30 minutes at cruise for day VFR, 45 minutes for night VFR and for IFR flights, to be added to the trip. Check the rules of your country, which can be stricter.

How is the trip fuel computed?

The trip fuel is the fuel burn per hour multiplied by the flight time. Use the burn at the planned power, altitude and speed, and add the climb, which burns more than cruise. The flight time comes from the distance and the ground speed, with the wind forecast along the route.

Why add margin on top?

The winds, the route and the delays are never exactly as planned. A margin of 10 percent of the trip, or a time buffer, is common for contingency. Planning based on the usable fuel, not the total capacity, avoids counting fuel that cannot reach the engine.

What if the result is negative?

A negative fuel left means the requirement is greater than the fuel on board. Refuel, shorten the flight, plan a stop or reduce the reserve only if the rules allow it. Never rely on the reserve to reach the destination: it is there for the unexpected.

Was this calculator helpful?

Thanks for your feedback!

Results are estimates provided for information purposes. They do not replace professional advice.