Skip to content
Omnikalc

FM bandwidth calculator (Carson rule)

Enter the peak frequency deviation, the highest modulating frequency and the channel spacing to get the modulation index, the bandwidth given by Carson rule and the improvement in noise over AM.

Updated on
Your inputs
kHz

Value out of range

kHz

Value out of range

kHz

Value out of range

Results

Bandwidth (Carson rule)

180.0 kHz

Modulation index
5.00
Wideband FM
Share of the channel spacing
90.0 %
Fits in the channel
Significant sideband pairs (approx.)
6
Noise improvement over AM (tone modulation)
15.7 dB

The FM bandwidth calculator applies Carson rule to give the bandwidth of a frequency-modulated signal, with its modulation index, the share of the channel it uses and the noise improvement over AM.

How the calculation works

  • Enter the peak frequency deviation and the highest modulating frequency.
  • Enter the channel spacing.
  • The calculator gives the bandwidth, the modulation index, the share of the channel, the sideband pairs and the noise improvement.

Example

Broadcast FM uses a deviation of 75 kHz and audio up to 15 kHz. The modulation index is 75 / 15 = 5.00. Carson rule gives 2 × (75 + 15) = 180.0 kHz, which takes 90.0 % of a 200 kHz channel. About 6 pairs of sidebands are significant, and the noise improvement over AM is 15.7 dB.

Why it matters

The calculator helps students in radio communications, amateur radio operators and engineers who plan channel spacing or choose the deviation of an FM system, such as a two-way radio or a wireless microphone.

Good to know

Carson rule is an approximation, and a more exact value comes from the Bessel functions of the first kind, which give the amplitude of each sideband. For small indices, the rule slightly overestimates the bandwidth, and for large ones it is close to exact. Narrowband FM for two-way radio uses a deviation of 2.5 to 5 kHz and audio up to 3 kHz, so the bandwidth is 11 to 16 kHz. Pre-emphasis boosts high audio frequencies before modulation, to improve the noise performance, and de-emphasis restores them. The noise improvement applies only above the threshold, a minimum input signal-to-noise ratio of about 10 dB. Below it, FM noise rises quickly.

The AM modulation power calculator covers amplitude modulation, the bit error rate calculator covers digital modulations, the SNR calculator converts ratios and the Nyquist sampling calculator relates bandwidth and sampling.

Frequently asked questions

What is Carson rule?

It estimates the bandwidth that holds about 98 % of the power of an FM signal: twice the sum of the peak deviation and the highest modulating frequency, B = 2 (Δf + fm). It is an approximation, easy to use for any modulation index.

What is the modulation index?

For FM it is the ratio of the peak deviation to the modulating frequency. A small index, below about 0.5, gives narrowband FM whose bandwidth is close to that of AM, 2 fm. A large index gives wideband FM, with a bandwidth dominated by the deviation.

Why use wideband FM?

Spending bandwidth buys noise immunity. For a tone, the signal-to-noise ratio is about 1.5 β² times that of AM, above the threshold of the demodulator. With β = 5 that is about 16 dB, one reason why broadcast FM sounds clean.

Was this calculator helpful?

Thanks for your feedback!

Results are estimates provided for information purposes. They do not replace professional advice.