Skip to content
Omnikalc

Glacier ice flow calculator: how fast does the ice move under Glen's flow law?

Enter the ice thickness, the surface slope and the ice temperature to get the basal shear stress, the surface speed from deformation and the flux of ice.

Updated on
Your inputs
m

Value out of range

°

Value out of range

Results

Surface speed from deformation

10.9 m/yr

Basal shear stress

118 kPa

Typical glacier The stress is in the usual 50 to 150 kPa range for valley glaciers.
Mean speed over the thickness
8.7 m/yr
Ice flux per metre of width
2,187 m²/yr
Time for surface ice to move 1 km
91.5 years
Surface movement per day
3.0 cm

A glacier is a slow river of ice. Under its own weight, the ice deforms like a very thick fluid, and the speed of the flow depends strongly on the thickness, the slope and the temperature. This calculator uses Glen’s flow law in the parallel-slab approximation to estimate the basal shear stress, the surface speed from deformation and the flux of ice through a section.

How the calculation works

  • Basal shear stress τ = ρ × g × H × sin α, with ice density ρ = 917 kg/m³ and g = 9.81 m/s²
  • Strain rate law (Glen): ε̇ = A × τⁿ, with n = 3
  • Surface speed u = (2 A ÷ (n + 1)) × (ρ g sin α)ⁿ × H^(n+1)
  • Mean speed over the thickness = u × (n + 1) ÷ (n + 2) = 0.8 u
  • Flux = mean speed × thickness, in m² per year for each metre of width

Example

A glacier 250 m thick on a 3° slope with ice at -2 °C (A = 1.7 × 10⁻²⁴ Pa⁻³ s⁻¹) has a basal shear stress of 118 kPa. The surface moves at 10.9 m per year by deformation alone, which is 3.0 cm a day, and the mean speed is 8.7 m per year. The flux is 2,187 m² per year for each metre of width, and the surface ice needs 91.5 years to cover 1 km.

Why it matters

The speed grows with the fourth power of the thickness and the cube of the slope, so small changes have large effects: doubling the thickness multiplies the deformation speed by 16. This is why thick outlet glaciers are so much faster than thin ice caps, and why thinning from climate warming slows the deformation part of the flow. The basal shear stress of about 100 kPa is a nearly universal value for glaciers on a bed, which lets glaciologists estimate ice thickness from the slope alone.

Good to know

The model counts only internal deformation. Many glaciers also slide over the bed on a film of meltwater, and this sliding can double or multiply the speed. The parallel-slab approximation fits best when the ice is much longer than thick. Ice at 0 °C flows about twenty times faster than ice at -20 °C. The flow law parameter values come from laboratory and field studies, so the real speed can differ by a factor of two.

In practice

Use the result as an order of magnitude to plan stake measurements or to check a model. For a safety assessment, rely on field surveys and local experts, because crevasses and meltwater change the behaviour of real glaciers. The tool is educational.

Frequently asked questions

What is Glen's flow law?

It is the rule that the strain rate of ice is proportional to the cube of the stress: ε̇ = A τ³. A depends on the temperature, and the exponent 3 makes the flow very sensitive to thickness and slope.

How fast do glaciers move?

Most valley glaciers move from a few metres to a few hundred metres a year. With the default values, deformation alone gives 10.9 m per year at the surface, and fast outlet glaciers reach several kilometres a year thanks to sliding.

Why is the basal shear stress near 100 kPa?

Ice flows until the driving stress is high enough to balance the resistance of the bed and the margins. Observations show a narrow range of about 50 to 150 kPa for many glaciers.

Does the calculator include basal sliding?

No. It gives the part of the speed due to internal deformation. Sliding depends on meltwater and the bed and must be measured or modelled separately.

Was this calculator helpful?

Thanks for your feedback!

Results are estimates provided for information purposes. They do not replace professional advice.