Skip to content
Omnikalc

Isothermal gas expansion calculator

Enter the amount of gas, the temperature and the initial and final volumes to get the work, the heat absorbed, the entropy change and the two pressures.

Updated on
Your inputs
mol

Value out of range

°C

Value out of range

L

Value out of range

L

Value out of range

Results

Work done by the gas

2,271 J

Expansion: the gas does work on its surroundings
Heat absorbed from the surroundings
2,271 J
Entropy change of the gas
7.618 J/K
Initial pressure
247.9 kPa
Final pressure
99.2 kPa
Free energy change (−T ΔS)
-2,271 J

The isothermal gas expansion calculator gives the work, the heat absorbed, the entropy change and the initial and final pressures of an ideal gas that changes volume at constant temperature.

How the calculation works

  • Enter the amount of gas in moles and the temperature.
  • Enter the initial volume and the final volume.
  • The calculator gives the work, the heat, the entropy change, the two pressures and the free energy change.

Example

A gas of 1 mol at 25 °C (298.15 K) that expands from 10 L to 25 L does W = 1 × 8.314 × 298.15 × ln 2.5 = 2,271 J of work. It absorbs 2,271 J of heat, its entropy rises by 7.618 J/K and the pressure falls from 247.9 kPa to 99.2 kPa.

Why it matters

The calculator helps students of physics, chemistry and engineering to check a thermodynamics exercise, to compare an isothermal process with an adiabatic one and to find the heat to supply to a gas that expands slowly.

Good to know

The formulas hold for a reversible process, which in practice means a slow expansion against a pressure almost equal to the gas pressure, with a thermal contact that keeps the temperature constant. A quick expansion against a lower pressure does less work, and the gas then cools. For a compression the volume ratio is below 1, the logarithm is negative and the work is negative, which means that work is done on the gas and heat flows out. The work equals the area under the curve p = nRT / V on a pressure volume diagram. The temperature must be in kelvin in the formula, and the calculator converts it from degrees Celsius.

The ideal gas calculator relates pressure, volume and temperature, the combined gas law calculator compares two states, the Carnot efficiency calculator uses two isothermal steps and the Gibbs free energy calculator covers chemical reactions.

Frequently asked questions

What is the work of an isothermal expansion?

For a reversible expansion of an ideal gas at constant temperature the work is W = n R T ln(V2 / V1). The internal energy of an ideal gas depends only on the temperature, so it does not change and the heat absorbed equals the work. The pressure falls in inverse proportion to the volume.

How does the entropy change?

The entropy of the gas changes by ΔS = n R ln(V2 / V1), which is positive in an expansion. For a reversible process the surroundings lose the same entropy, so the total is zero. In a free expansion into a vacuum the gas does no work and takes no heat, but its entropy rises by the same amount and the total grows.

When does the ideal gas model fail?

At high pressure or low temperature, the molecules attract each other and have a volume, and the result moves away from the ideal gas law. The temperature of a real gas also changes in a free expansion. Use the ideal model for air near room conditions and for the first estimate of other gases.

Was this calculator helpful?

Thanks for your feedback!

Results are estimates provided for information purposes. They do not replace professional advice.