Skip to content
Omnikalc

Prandtl-Meyer expansion calculator: supersonic flow turning around a corner

Enter the Mach numbers before and after a supersonic expansion and the ratio of specific heats to get the Prandtl-Meyer angles, the turning angle, the Mach angles and the pressure, temperature and density ratios.

Updated on
Your inputs

Value out of range

Value out of range

Value out of range

Results

Turning angle of the flow θ

23.38 °

Prandtl-Meyer function ν(M₁)
26.38 °
Prandtl-Meyer function ν(M₂)
49.76 °
Mach angle μ₁
30.00 °
Mach angle μ₂
19.47 °
Pressure ratio p₂/p₁
0.2130
Temperature ratio T₂/T₁
0.6429
Density ratio ρ₂/ρ₁
0.3313

Supersonic flow expands in a smooth fan when the wall turns away from it. The Prandtl-Meyer expansion calculator gives the turning angle between two Mach numbers, with the Prandtl-Meyer function, the Mach angles and the pressure, temperature and density ratios across the fan.

How the calculation works

  • Enter the Mach number before the expansion (M₁) and the Mach number after it (M₂). Both must be supersonic.
  • Enter the ratio of specific heats γ: 1.4 for air at ordinary temperatures.
  • The calculator computes the Prandtl-Meyer function ν(M) = √((γ+1)/(γ−1)) arctan √((γ−1)(M²−1)/(γ+1)) − arctan √(M²−1) for both Mach numbers.
  • The turning angle is θ = ν(M₂) − ν(M₁). The result also gives the Mach angles and the ratios of pressure, temperature and density across the expansion fan.

Example

A supersonic flow of air (γ = 1.4) goes around a convex corner and accelerates from M₁ = 2.0 to M₂ = 3.0. The Prandtl-Meyer function is 26.38° at Mach 2 and 49.76° at Mach 3, so the flow turns by 23.38°. The pressure falls to 0.2130 of its upstream value, the temperature to 0.6429 and the density to 0.3313.

Why it matters

The calculator helps students of gas dynamics and aerospace engineers to size the expansion at the corner of a nozzle, a wing or a body, to check hand calculations and to see how fast the pressure falls with the Mach number.

Good to know

The model is for a steady, two-dimensional, inviscid and isentropic flow of a calorically perfect gas. It ignores the boundary layer, the real-gas effects at high temperatures and three-dimensional effects. The expansion is limited by the vacuum limit: at very high turning angles the flow separates. For a flow with a shock, use the oblique and normal shock relations.

The isentropic flow calculator gives the ratios of a nozzle flow, the normal shock relations calculator covers the shock waves, the Mach number calculator converts speed to Mach, and the speed of sound calculator gives the sound speed in air.

Frequently asked questions

What is a Prandtl-Meyer expansion?

When a supersonic flow goes around a convex corner, or into a region of lower pressure, it expands through a fan of Mach waves that start at the corner. The flow accelerates and turns, with a lower pressure, temperature and density. The expansion is smooth and isentropic, in contrast with a shock wave, which is a sudden compression with a loss of total pressure. Theodor Meyer solved the problem in 1908 in his thesis under Prandtl.

What does the Prandtl-Meyer function mean?

The function ν(M) is the angle through which a flow at Mach 1 must turn to reach the Mach number M. It is 0° at Mach 1, 26.38° at Mach 2, 49.76° at Mach 3 and tends to 130.45° at infinite Mach for air. The turning angle between two Mach numbers is simply the difference of the two values, which is why the calculator needs no iteration if you know both Mach numbers.

How do I find M₂ if I only know the turning angle?

You add the turning angle to ν(M₁) and then look for the Mach number that has this value of ν. This inversion needs a numerical solution or a table. Here, enter a few values of M₂ until the turning angle matches yours. The calculator shows the turning angle for each value, so it takes only a few tries.

Where is it used?

It is used for the flow at the edge of a nozzle that expands to the ambient pressure, over the shoulder of a supersonic wing or body, and in the thin-airfoil theory of Ackeret at supersonic speeds. Combined with oblique shocks, it gives the lift and the wave drag of simple shapes such as a diamond airfoil. It is also found in the design of supersonic wind tunnels with the method of characteristics.

Was this calculator helpful?

Thanks for your feedback!

Results are estimates provided for information purposes. They do not replace professional advice.