Skip to content
Omnikalc

Josephson junction calculator

Enter a DC voltage across a junction, a microwave drive frequency and a step number to get the Josephson frequency, the Shapiro step voltage and the size of an array.

Updated on
Your inputs
µV

Value out of range

GHz

Value out of range

Value out of range

Results

Josephson frequency at this voltage

4.8360 GHz

Period of the oscillation
206.8 ps
Voltage of the first Shapiro step at the drive frequency
20.678 µV
Voltage of the selected Shapiro step
62.04 µV
Junctions in series for 1 V on the first step
48,360
Josephson constant K_J
483.5978 GHz/mV

The Josephson junction calculator gives the Josephson frequency for a DC voltage, the period of the oscillation, the Shapiro step voltage for a microwave drive, the voltage of a chosen step, the number of junctions in an array for 1 V and the Josephson constant.

How the calculation works

  • Enter the DC voltage across the junction, in microvolts.
  • Enter the drive frequency of the microwave, in gigahertz.
  • Enter the step number to see the voltage of that Shapiro step.

Example

A voltage of 10 µV µV makes the junction oscillate at 4.8360 GHz, a period of 206.8 ps. A drive of 10 GHz GHz gives a first step of 20.678 µV, and step number 3 is at 62.04 µV. An array for 1 V needs 48,360 junctions.

Why it matters

The calculator helps physics students and metrologists who work with superconducting circuits, quantum voltage standards and SQUID electronics, and who need the frequency or the voltage given by the relation between the two.

Good to know

The relation f = 2eV/h is exact, but real junctions have a critical current and an internal resistance, and the steps only appear for the right drive power, so a design needs more than this formula. Microvolt voltages need very low noise and thermal care, and the frequency is high, in the gigahertz range. The practical voltage standards use arrays of tens of thousands of junctions at frequencies of 10 to 75 GHz to reach 1 V to 10 V. The Josephson constant K_J equals 2e/h, which is 483.5978 GHz per millivolt. Because the first step of a 10 GHz drive is only about 20.7 microvolts, thousands of junctions in series are needed to reach a volt, and the number scales inversely with the drive frequency.

The magnetic field calculator gives the field of currents, the voltage divider calculator scales voltages, the photon energy calculator links frequency and energy and the Doppler calculator treats frequency shifts.

Frequently asked questions

What is the Josephson effect?

Two superconductors separated by a thin insulating barrier form a Josephson junction. A DC voltage V across the junction makes the supercurrent oscillate at a frequency f = 2eV/h, where e is the charge of the electron and h the Planck constant. The frequency depends only on the voltage and on fundamental constants, about 483.6 MHz per microvolt.

What are Shapiro steps?

When a microwave of frequency f is applied to the junction, its current-voltage curve shows constant-voltage steps at V = n h f / (2e), with n an integer. The voltage of each step depends only on the drive frequency and fundamental constants, which makes it a precise voltage reference.

Why is it used as a voltage standard?

Since 1990 the volt has been realized in laboratories with arrays of thousands of junctions in series driven by a microwave, which add up the steps to volts. The conventional value of the Josephson constant, K_J-90 = 483 597.9 GHz/V, was used until the 2019 SI redefinition, which fixed h and e exactly.

What does the calculator not model?

It does not model the dynamics of a real junction, such as its critical current, its capacitance and the noise. It gives the ideal relations between voltage and frequency. A real standard needs cryogenic temperatures, shielding and careful microwave design.

Was this calculator helpful?

Thanks for your feedback!

Results are estimates provided for information purposes. They do not replace professional advice.