The landing distance calculator estimates the touchdown speed, the braking ground roll and the total landing distance over an obstacle from the stall speed in landing configuration, the headwind, the braking deceleration, the runway slope and the approach angle.
How the calculation works
- Enter the stall speed in landing configuration and the approach speed factor.
- Enter the headwind, the braking deceleration, the runway slope and the approach angle.
- Enter the obstacle height and read the roll and the total distance.
Example
A stall speed of 48 kt with a factor of 1.3 gives a touchdown speed of 62.4 kt, or 54.4 kt over the ground with a headwind of 8 kt. The approach from the obstacle takes 954 ft, the braking ground roll is 374 ft and lasts 8.2 s, and the total is 1,328 ft. With the 1.67 factor it becomes 2,218 ft.
Why it matters
The calculator helps pilots, students and instructors check whether a runway is long enough, see the effect of a headwind, a wet surface or a slope on the landing, and understand why a small increase of speed on the approach adds a large distance.
Good to know
Use the performance chart of the aircraft for the actual weight, altitude and temperature, since this simple model ignores the flare, the reaction time, the reverse thrust and the density altitude, which lengthens the roll at a high or hot airport. The deceleration depends strongly on the braking technique and on the state of the runway. Add margin and keep a go-around option. This calculation is for planning and learning, and it is not a substitute for the aircraft manual.
Related tools
The crosswind component calculator helps landings, the stopping distance calculator treats vehicles, the density altitude calculator shows performance and the wing loading calculator explains the stall speed.