Skip to content
Omnikalc

Lapse rate and atmospheric stability calculator

Enter the temperatures at two heights to get the environmental lapse rate and compare it with the dry and saturated adiabatic rates to find whether the air is stable.

Updated on
Your inputs
°F

Value out of range

ft

Value out of range

°F

Value out of range

ft

Value out of range

°F/1000 ft

Value out of range

Results

Environmental lapse rate

5.00 °F/1000 ft

Stability (0 absolutely stable, 1 conditionally unstable, 2 absolutely unstable)

1

Dry adiabatic lapse rate
5.38 °F/1000 ft
Saturated adiabatic lapse rate (typical)
3.30 °F/1000 ft
Temperature inversion (1 yes, 0 no)
0
Temperature of a dry parcel lifted to the upper level
50.1 °F
Parcel minus environment at the upper level
-1.9 °F

The lapse rate and atmospheric stability calculator gives the environmental lapse rate, the dry and saturated adiabatic rates, the stability class, whether there is a temperature inversion, the parcel temperature at the upper level and the parcel minus environment difference.

How the calculation works

  • Enter the temperature and height of the lower level, often the ground.
  • Enter the temperature and height of the upper level.
  • Check the saturated adiabatic rate, 6 °C per km by default, and read the stability class.

Example

With 77 °F at 0 ft and 52 °F at 5000 ft, the environmental lapse rate is 5.00 °F/1000 ft, against 5.38 °F/1000 ft for dry air and 3.30 °F/1000 ft for saturated air. The stability class is 1, and the inversion flag is 0. A dry parcel lifted to the upper level would be at 50.1 °F, -1.9 °F against the environment.

Why it matters

The calculator helps meteorology and geography students, pilots, glider and balloon pilots, hikers and air quality analysts who read a sounding or two station temperatures and want to know whether the air is stable or unstable and whether convection or fog is likely.

Good to know

Use temperatures measured at the same time and heights above the same reference, in the same layer of air. A single layer gives an average lapse rate, and a real sounding has stable and unstable layers, so analyze it by layers. The saturated rate depends on the temperature and the pressure and ranges from about 3 to 9 °C per kilometer, so adjust it if you know the conditions. The class is a rule of thumb: the actual development of convection depends on the moisture, the trigger and the winds.

The Brunt–Väisälä frequency calculator gives the oscillation of a stable layer, the dew point calculator finds the saturation temperature, the cloud base calculator estimates the height of cumulus clouds and the wet-bulb temperature calculator combines heat and humidity.

Frequently asked questions

What is a lapse rate?

The lapse rate is the rate at which the air temperature decreases with height. The environmental lapse rate (ELR) is the one measured in the actual atmosphere, typically about 6.5 °C per kilometer (3.6 °F per 1000 feet) in the standard atmosphere. It varies a lot with the weather and the time of day, and it can be negative in a temperature inversion.

What are the dry and saturated adiabatic lapse rates?

A rising parcel of unsaturated air cools at the dry adiabatic lapse rate, 9.8 °C per kilometer (5.4 °F per 1000 feet), as it expands. Once saturated, the release of latent heat from condensation slows its cooling to the saturated (moist) adiabatic rate, which ranges from about 3 °C per kilometer in warm humid air to nearly 9 °C per kilometer in very cold air, and is often taken as 6 °C per kilometer.

How is the stability determined?

If the ELR is below the saturated rate, a lifted parcel is colder than its surroundings and sinks back: the air is absolutely stable. If the ELR is above the dry rate, a parcel is warmer and keeps rising: absolutely unstable. Between the two, the air is conditionally unstable: stable for dry parcels and unstable if the parcel becomes saturated and is lifted far enough.

Why does stability matter?

Stable air suppresses vertical motion and traps pollution and smoke near the ground, giving fog and layered clouds. Unstable air favors convection, cumulus clouds, showers and thunderstorms, and gusty winds. Pilots, glider pilots, firefighters and air quality forecasters follow the stability of the atmosphere.

Was this calculator helpful?

Thanks for your feedback!

Results are estimates provided for information purposes. They do not replace professional advice.