Air in a stable layer acts like a spring: pushed up or down, it comes back and oscillates. The Brunt–Väisälä frequency calculator takes the potential temperature at two levels and the height between them, and gives the squared buoyancy frequency N², the buoyancy frequency N, the buoyancy period, the potential temperature gradient, and a plain statement on whether the layer is stable, neutral or unstable.
How the calculation works
- Enter the potential temperature at a lower and an upper level, and the height between them.
- The calculator converts the temperatures to kelvin, takes their mean, and computes the squared buoyancy frequency: N² = (g / θ) × Δθ / Δz.
- A positive N² means the layer is stable: an air parcel pushed up or down returns and oscillates at the frequency N, with the period 2π / N.
- A negative N² means the layer is unstable, and the parcel keeps going: this is convection. A value close to zero means a neutral layer.
Example
A layer between two levels 3,000 ft (914.4 m) apart has potential temperatures of 59 °F and 66.2 °F, a rise of 4 K. With a mean of 290.15 K, N² = 9.80665 / 290.15 × 4 / 914.4 = 1.4785 × 10⁻⁴ s⁻². The buoyancy frequency is 0.01216 rad/s, and the buoyancy period is 8.6 min: a parcel that is displaced vertically oscillates once every 8.6 minutes.
Why it matters
The buoyancy frequency is the base measure of stability in meteorology and oceanography. It decides whether air can rise and form storms, whether pollution is trapped under an inversion, how mountain waves behave, and how far internal waves in the sea can travel. It is used in weather forecasts, in aviation and in studies of air quality.
Good to know
The calculator uses the finite difference between two levels, so it gives a layer average. Real profiles vary in height and moisture changes the picture: in a cloud, the moist buoyancy frequency, which includes condensation, applies. The temperatures must be potential temperatures and not the air temperatures. Use the result as an estimate of the stability of a layer.
Related tools
The potential temperature calculator computes θ from the air temperature and pressure, the geostrophic wind calculator covers the wind from the pressure gradient, the barometric pressure calculator links pressure to altitude, and the cloud base calculator estimates where the rising air condenses.