Skip to content
Omnikalc

Laser nominal ocular hazard distance (NOHD) calculator

Enter the laser power, the beam divergence, the exit beam diameter and the maximum permissible exposure to get the safe distance and the eyewear density.

Updated on
Your inputs
mW

Value out of range

mrad

Value out of range

mm

Value out of range

W/m²

Value out of range

m

Value out of range

Results

Nominal ocular hazard distance

12.8 m

Irradiance at the exit aperture
707 W/m²
Irradiance at the viewing distance
99.5 W/m²
Beam diameter at the viewing distance
8.0 mm
Eyewear optical density needed at the exit
1.44

The laser eye safety distance calculator gives the nominal ocular hazard distance, the irradiance at the exit and at a given distance, the beam diameter and the optical density of the eyewear needed.

How the calculation works

  • Enter the laser power, the full beam divergence and the beam diameter at the exit.
  • Enter the maximum permissible exposure from the standard and the viewing distance.
  • The calculator gives the distance where the beam falls to the permissible level, the irradiance there and the eyewear density for the worst case.

Example

A laser of 5 mW with a divergence of 1 mrad and an exit diameter of 3 mm has an irradiance of 707 W/m² at the exit. With an exposure limit of 25.5 W/m² the nominal ocular hazard distance is 12.8 m. At 5 m the beam is 8.0 mm wide with 99.5 W/m², and eyewear of optical density 1.44 is needed at the exit.

Why it matters

The calculator helps laser users, teachers, event technicians and safety officers who estimate the hazard zone of a pointer, a show laser or a laboratory beam, and choose the eyewear and the warning distance.

Good to know

The result is an estimate for a collimated beam and an idealized limit. The standards require a classification of the laser, a controlled area, warning signs and, for classes 3B and 4, protective eyewear rated for the wavelength. The divergence on the data sheet may be a half-angle or a full angle, so check the definition. A reflection from a mirror or a glossy surface can send a dangerous beam in an unexpected direction, and optical instruments such as binoculars concentrate the power. Keep the beam above or below eye level, switch it off when it is not in use and follow the rules of the country, particularly for outdoor and aviation use.

The laser beam spot calculator gives the size of the spot, the photon energy calculator relates the wavelength to the energy, the inverse square law calculator handles the fall of intensity with distance and the UV disinfection dose calculator treats another radiation exposure.

Frequently asked questions

What is the nominal ocular hazard distance?

The nominal ocular hazard distance, NOHD, is the distance from the laser beyond which the irradiance of the beam falls below the maximum permissible exposure for the eye. Inside the NOHD the beam can damage the eye, and outside it the exposure is considered safe. For a beam of power P, divergence φ and exit diameter a, NOHD = (√(4 × P / (π × MPE)) − a) / φ.

What value should I take for the MPE?

The maximum permissible exposure depends on the wavelength, the exposure time and the type of laser, and it is set by standards such as IEC 60825-1 and ANSI Z136.1. For a visible continuous beam and the blink reflex of 0.25 s, the corneal MPE is about 25.4 W/m², which is 2.5 mW/cm². Infrared and pulsed lasers have other values, so read the table of the standard.

How is the eyewear density found?

The optical density OD of protective eyewear must reduce the irradiance at the eye to the MPE or below. OD = log10(E / MPE), where E is the irradiance at the point where the eye may be. The calculator gives the value at the exit of the laser, which is the worst case. An OD of 2 reduces the power by 100, an OD of 3 by 1 000.

What does the calculator not cover?

It treats a continuous, collimated, circular beam in clear air, and it does not cover pulsed lasers, extended sources, magnified viewing through binoculars or reflections from shiny surfaces. A laser classification and a safety assessment must follow the standard and a laser safety officer. Never point any laser at people, vehicles or aircraft.

Was this calculator helpful?

Thanks for your feedback!

Results are estimates provided for information purposes. They do not replace professional advice.