Skip to content
Omnikalc

Moist air enthalpy calculator: enthalpy, humidity ratio, dew point and volume of humid air

Enter the air temperature, the relative humidity and the pressure to get the enthalpy, the humidity ratio, the dew point and the specific volume of moist air.

Updated on
Your inputs
°F

Value out of range

%

Value out of range

inHg

Value out of range

Results

Enthalpy of the moist air

21.61 BTU/lb

Humidity ratio
69.0 gr/lb
Dew point
56.9 °F
Comfortable
Specific volume of the mixture
13.74 ft³/lb
Vapor pressure of the water
0.467 inHg

A psychrometric chart gives the properties of humid air, and this moist air enthalpy calculator does the same job with a formula. Enter the temperature, the relative humidity and the pressure, and get the enthalpy, the humidity ratio, the dew point, the specific volume and the vapor pressure of the air.

How the calculation works

  • Enter the dry-bulb temperature, the relative humidity and the barometric pressure.
  • The calculator finds the saturation vapor pressure with the Magnus formula, the vapor pressure as the relative humidity times that value, and the humidity ratio W = 0.622 pv / (P − pv).
  • The enthalpy is h = 1.006 T + W (2501 + 1.86 T) in kJ/kg of dry air, with T in °C, shown here in BTU per pound of dry air.
  • It also gives the dew point and the specific volume of the mixture per unit mass of dry air.

Example

For air at 77 °F, 50 % relative humidity and 29.92 inHg, the vapor pressure is 1.58 kPa, which gives a humidity ratio of 69.0 grains per pound (9.86 g/kg). The enthalpy is 21.61 BTU/lb of dry air (50.3 kJ/kg), the dew point is 56.9 °F and the specific volume is 13.74 ft³/lb of dry air.

Why it matters

Heating, cooling and ventilation systems move heat and also water. The enthalpy tells how much energy is in the air, in a single number, which is why it is used to size cooling coils, to compare outdoor and indoor air for an economizer and to follow a drying process. The dew point shows whether water will condense on a cold surface.

Good to know

The calculator treats dry air and water vapor as ideal gases, and it uses the saturation pressure over liquid water with the Magnus formula, valid roughly from −20 to 60 °C. It does not include the enhancement factor of the vapor pressure, which adds about 0.4 % at normal pressure. At high altitude, enter the actual local pressure, not the sea-level value that weather reports use.

The dew point calculator covers the temperature of condensation, the wet-bulb temperature calculator covers evaporative cooling, the mixing ratio calculator covers the water content, and the heat index calculator covers the effect on comfort.

Frequently asked questions

What is the enthalpy of moist air?

It is the total heat content of the air and the water vapor it carries, per unit mass of dry air. It has a sensible part, from the temperature of the dry air, and a latent part, from the vapor, which carries the heat of vaporization of water (about 2,501 kJ/kg at 0 °C). On a warm and humid day, the latent part can be more than half of the total.

Why is the enthalpy given per mass of dry air?

The amount of dry air stays constant when the air is heated, cooled, humidified or dried, while the amount of water changes. Using the dry air as the reference is the usual convention of psychrometric charts. The specific volume and the humidity ratio use the same reference.

How do I use the enthalpy for an air conditioner?

The cooling load of an air stream is the mass flow of dry air times the difference of enthalpy between the entering and the leaving air. This includes the energy needed to remove moisture. Two conditions with the same temperature can have very different enthalpies if their humidity differs.

How accurate is the calculator?

The Magnus formula for the saturation pressure is within about 0.1 % between 0 and 60 °C, and the ideal gas mixture model is good at normal pressures. The values are close to the ASHRAE psychrometric tables. Below freezing, the saturation pressure is that over liquid water, not over ice.

Was this calculator helpful?

Thanks for your feedback!

Results are estimates provided for information purposes. They do not replace professional advice.