Skip to content
Omnikalc

How much heat does your reaction release or absorb?

Enter the coefficients and standard enthalpies of formation of up to two reactants and two products, and the moles of reaction: get ΔH°, the heat exchanged and its value in kcal and kWh.

Updated on
Your inputs

Value out of range

Value out of range

Value out of range

Value out of range

Value out of range

Value out of range

Value out of range

Value out of range

Value out of range

Results

Enthalpy of reaction ΔH° per mole of reaction

-890.3 kJ

Exothermic: the reaction releases heat

Heat exchanged for the amount reacted

-1,780.6 kJ

In kilocalories
-425.6 kcal
In kilowatt-hours
-0.495 kWh

The enthalpy of reaction is the heat released or absorbed when a chemical reaction takes place at constant pressure. Hess’s law lets you compute it from tabulated standard enthalpies of formation without measuring the reaction itself: add up the formation enthalpies of the products, weighted by their coefficients, and subtract those of the reactants. This calculator handles up to two reactants and two products, then scales the result to the amount that reacts.

How the calculation works

  • ΔH° of reaction = Σ(coefficient × ΔHf° of products) − Σ(coefficient × ΔHf° of reactants)
  • Heat for the amount reacted = ΔH° × moles of reaction
  • Conversions: 1 kcal = 4.184 kJ and 1 kWh = 3,600 kJ

Leave an unused species at a coefficient of 0.

Example

For methane combustion, CH₄ + 2 O₂ → CO₂ + 2 H₂O(l), the formation enthalpies are −74.8 for CH₄, 0 for O₂, −393.5 for CO₂ and −285.8 for liquid water, in kJ/mol. The products total −393.5 + 2 × (−285.8) = −965.1 and the reactants −74.8, so ΔH° = −890.3 kJ per mole of reaction. For 2 moles of methane, the heat released is 1,780.6 kJ, or about 425.6 kcal or 0.495 kWh.

Reading the sign

A negative ΔH is exothermic: the system loses energy as heat, as in combustion. A positive ΔH is endothermic: the reaction absorbs heat from its surroundings, as in the decomposition of calcium carbonate. The sign depends on the equation as written, so reversing the reaction changes the sign, and multiplying the coefficients multiplies ΔH.

Things to check

Use values for the same temperature (usually 25 °C) and the same states, since liquid and gaseous water differ by about 44 kJ/mol. Make sure the equation is balanced. The enthalpy of reaction tells you the heat, not whether the reaction occurs spontaneously: that depends also on entropy and temperature through the Gibbs free energy.

Frequently asked questions

What is the enthalpy of reaction?

The heat exchanged at constant pressure when a reaction takes place as written. It equals the products' formation enthalpies minus the reactants'.

What is the standard enthalpy of formation?

The enthalpy change when one mole of a compound forms from its elements in their standard states. It is 0 for the elements themselves.

What does a negative value mean?

The reaction is exothermic and releases heat to the surroundings.

Which state of water should I use?

Use −285.8 kJ/mol for liquid water and −241.8 kJ/mol for steam; the difference is the heat of vaporization.

Was this calculator helpful?

Thanks for your feedback!

Results are estimates provided for information purposes. They do not replace professional advice.