Skip to content
Omnikalc

Newton’s rings calculator

Enter the wavelength, the radius of curvature of the lens and the ring number to get the ring radius, the spacing and the number of rings in the aperture.

Updated on
Your inputs
nm

Value out of range

m

Value out of range

Value out of range

Value out of range

mm

Value out of range

Results

Radius of the dark ring

2.427 mm

Diameter of the dark ring
4.854 mm
Radius of the bright ring of the same number
2.365 mm
Spacing to the next dark ring
0.1185 mm
Number of dark rings inside the aperture
170

The Newton’s rings calculator gives the radius and diameter of the dark rings, the radius of the bright rings, the spacing between rings and the number of rings inside the contact aperture.

How the calculation works

  • Enter the wavelength of the light and the radius of curvature of the lens.
  • Enter the ring number, the refractive index of the gap and the radius of the aperture where the lens touches the plate.
  • The calculator applies r = √(m × λ × R / n) for the dark rings and the half-integer version for the bright ones.

Example

With sodium light of 589 nm and a lens of 1 m radius of curvature, the dark ring number 10 has a radius of 2.427 mm and a diameter of 4.854 mm. The bright ring of the same number is at 2.365 mm, and the next dark ring is 0.1185 mm farther out. Within an aperture of 10 mm about 170 rings are visible.

Why it matters

The calculator helps students who do the Newton’s rings experiment in an optics laboratory, teachers who prepare the data, and opticians who test the flatness and the curvature of lenses and optical flats.

Good to know

In the laboratory the central spot is rarely perfectly dark or exactly at the contact because of dust, pressure and the flattening of the glass. For this reason measure the diameters of rings far from the centre and use the difference of two rings, as the formula in the guide does. Use monochromatic light, such as a sodium lamp or a filtered LED, since white light gives only a few colored rings. The number of rings visible in the aperture is limited by the coherence of the source, which should be at least twice the gap at the edge. The rings of a test glass that are not circular show that the surface is not spherical, so count the fringes and compare the shape with the reference flat.

The thin film interference calculator treats the same effect for a coating, the double slit calculator gives the fringes of two sources, the diffraction grating calculator gives the angles of a grating and the Fabry-Perot etalon calculator covers multiple-beam interference.

Frequently asked questions

What are Newton’s rings?

When a convex lens rests on a flat glass plate, the thin air wedge between them produces concentric interference rings around the contact point. The light reflected from the top and bottom of the gap interferes. In reflection the centre is dark, because of the phase change on one of the reflections, and the dark rings follow at radii that grow with the square root of the ring number.

What is the formula for the radius of the rings?

For the dark rings, r = √(m × λ × R / n), where m is the ring number, λ the wavelength, R the radius of curvature of the lens and n the index of the medium in the gap. For the bright rings, r = √((m − ½) × λ × R / n). The rings get closer together as the radius increases, because the spacing falls with the square root.

How are the rings used to measure a lens or a wavelength?

If you know the wavelength, the measured diameters of two rings give the radius of curvature: R = (Dm² − Dk²) / (4 × (m − k) × λ). If you know the lens, the same formula gives the wavelength. Using the difference of two ring diameters removes the unknown position of the true centre and the effect of dust at the contact.

How does a liquid in the gap change the rings?

A liquid of index n between the lens and the plate divides the ring radii by √n and makes the rings smaller and closer. This is a way to measure the index of a liquid: the ratio of the ring diameters in air and in the liquid is the square root of n. The calculator includes the index so that you can see the effect.

Was this calculator helpful?

Thanks for your feedback!

Results are estimates provided for information purposes. They do not replace professional advice.