Skip to content
Omnikalc

Oberth effect calculator

Enter the periapsis, the speed there and the delta-v of the burn to compare the energy and the hyperbolic excess speed with the same burn made far from the body.

Updated on
Your inputs
km

Value out of range

%

Value out of range

km/s

Value out of range

km/s

Value out of range

Results

Energy gain ratio (periapsis / far)

3.26 ×

Escape speed at periapsis
10.926 km/s
Speed at periapsis before the burn
10.926 km/s
Specific energy gained by the burn at periapsis
11.43 MJ/kg
Specific energy gained by the same burn far away
3.50 MJ/kg
Excess speed after the burn at periapsis (0 if still bound)
4.780 km/s

The Oberth effect calculator gives the escape speed at periapsis, the speed before the burn, the specific energy gained at periapsis and far away, the energy gain ratio and the excess speed after the burn for a craft near Earth, the Moon, Mars or the Sun.

How the calculation works

  • Choose the central body and enter the periapsis radius from its center.
  • Enter the speed at periapsis as a share of the escape speed, 100 percent for a parabolic orbit.
  • Enter the delta-v of the burn and the speed the craft would have if it burned far away.

Example

At a periapsis of 6678 km km the escape speed is 10.926 km/s. A burn of 1 km/s km/s from 10.926 km/s adds 11.43 MJ/kg, against 3.50 MJ/kg far away, a ratio of 3.26 ×. The craft leaves with an excess speed of 4.780 km/s.

Why it matters

The calculator helps students and space enthusiasts to see why escape and capture burns are made at the lowest point of an orbit, and how much a deep periapsis multiplies the effect of the same propellant.

Good to know

Measure the periapsis radius from the center of the body, adding the planet radius to the altitude. At 100 percent of the escape speed the orbit is parabolic and the excess speed comes only from the burn. At less than 100 percent the craft may still be bound after a small burn, and the excess speed is then zero. The model treats the burn as instantaneous, so it ignores the gravity losses of a long burn, which reduce the benefit of a low thrust. The comparison with a far burn assumes the same delta-v and a given speed there.

The escape velocity calculator gives the speed to leave a body, the rocket equation calculator links delta-v and propellant, the Hohmann transfer calculator treats the classic orbital change and the orbital period calculator gives the time around an orbit.

Frequently asked questions

What is the Oberth effect?

It is the fact that a rocket engine gives more useful energy when it burns while moving fast, so deep in a gravity well at periapsis, than when it burns slowly far from the body. The energy gained by a small burn is the speed times the delta-v, so the same propellant adds more energy at high speed.

Does it break the conservation of energy?

No. The extra energy comes from the propellant, which leaves the engine with a different amount of kinetic energy depending on the speed of the rocket. At high speed the exhaust is left with less energy, and the rocket keeps more. The total energy of rocket and exhaust is the same.

How is the excess speed calculated?

The calculator adds the delta-v to the speed at periapsis, squares it and subtracts the square of the escape speed to get the characteristic energy, then takes the square root. If the result is negative, the craft is still bound to the body and the excess speed is zero.

Where is it used?

It is the reason that escape burns are made at the low point of an orbit, as for a probe leaving Earth from low Earth orbit, and that gravity-assist and solar Oberth maneuvers are studied. A burn made at periapsis is much more effective than the same delta-v made at apoapsis.

Was this calculator helpful?

Thanks for your feedback!

Results are estimates provided for information purposes. They do not replace professional advice.