Skip to content
Omnikalc

Paraboloid calculator: volume, surface area and focal length of a dish

Enter the diameter of the opening and the depth of a parabolic dish to get its volume, its surface area, the focal length and the f/D ratio.

Updated on
Your inputs

Value out of range

Value out of range

Results

Volume of the paraboloid

7,238.23 in³

Surface area of the curved dish
1,997.77 in²
Focal length
18.000 in
Focal length to diameter ratio (f/D)
0.375
Volume as a share of the cylinder around it
50%

A satellite dish, a telescope mirror and a spotlight reflector all share the same bowl shape, a paraboloid. This paraboloid calculator takes the diameter of the opening and the depth of the dish to give its volume, the surface area of the curved dish, the focal length, the f/D ratio and the volume as a share of the cylinder around it.

How the calculation works

  • Volume = π × r² × h ÷ 2, where r is the radius of the opening (half the diameter) and h is the depth. A paraboloid holds exactly half of the cylinder with the same opening and height.
  • Surface area = π × r ÷ (6 × h²) × ((r² + 4h²)^(3/2) − r³), the area of the curved inner surface.
  • Focal length f = r² ÷ (4 × h), the distance from the vertex to the focus where parallel rays meet.
  • f/D ratio = focal length ÷ diameter. A deep dish has a small ratio and a shallow dish has a large one.

Example

A dish has an opening of 48 in and a depth of 8 in, so the radius is 24 in. The volume is π × 24² × 8 ÷ 2 = 7,238 in³, half of the cylinder of 14,476 in³. The focal length is 24² ÷ (4 × 8) = 18 in, and the f/D ratio is 18 ÷ 48 = 0.375. The curved surface has an area of π × 24 ÷ (6 × 64) × (832^1.5 − 13,824) = 1,997.7 in².

Why it matters

Designers of antennas, solar concentrators and reflectors need the focal length to place the receiver or the bulb, and the surface area to estimate the material, paint or coating. The volume is useful for bowls, tanks and for ground works with a parabolic profile.

Good to know

The shape is a perfect paraboloid of revolution, with no rim, no thickness and no distortion. Real dishes are made from panels, and surface errors reduce the focus. The surface area is for one side, and the volume is the space inside the bowl up to the plane of the rim. The depth is measured along the axis from the vertex to the plane of the rim.

The parabola calculator gives the equation and the focus of a two-dimensional curve, and the volume calculator covers other solids.

Frequently asked questions

What is a paraboloid?

A paraboloid of revolution is the bowl obtained by rotating a parabola about its axis. It is the shape of a satellite dish, a telescope mirror, a car headlight reflector and a solar cooker. Its main property is that all rays parallel to the axis are reflected to a single point, the focus.

How do I find the focal length of a dish?

Measure the diameter of the opening and the depth at the center. The focal length is the square of the radius divided by four times the depth. A dish with a 48 in opening and 8 in depth has its focus 18 in above the vertex, and that is where the receiver or the lamp goes.

Why is the volume exactly half the cylinder?

Archimedes showed that the volume of a paraboloid segment is half of the circumscribed cylinder of the same base and height. You can check it with an integral: the volume of the solid made by rotating y = x² gives π r² h ÷ 2. This is why the share of the cylinder is always 50%.

What is the f/D ratio used for?

The ratio of the focal length to the diameter describes how deep a reflector is. Values of about 0.25 describe a deep dish, where the focus lies in the plane of the rim, and values of 0.4 to 0.6 describe shallow dishes, common for television receivers and prime focus feeds.

Was this calculator helpful?

Thanks for your feedback!

Results are estimates provided for information purposes. They do not replace professional advice.