Skip to content
Omnikalc

Parent-daughter decay calculator (Bateman)

Enter the starting activity of the parent and the half-lives of the parent and of the daughter to get the activity of each after a given time, the time when the daughter peaks and the type of equilibrium.

Updated on
Your inputs
MBq

Value out of range

h

Value out of range

h

Value out of range

h

Value out of range

Results

Activity of the daughter

785.987 MBq

Activity of the parent
777.203 MBq
Total activity
1,563.190 MBq
Time when the daughter peaks
22.86 h
Peak activity of the daughter
786.579 MBq
Daughter-to-parent activity ratio now
1.0113
Ratio of half-lives, parent over daughter
10.98
Transient equilibrium: the daughter settles above the parent

The parent-daughter decay calculator gives the activity of the parent and of the daughter over time with the Bateman equation, the time of the daughter peak and the type of equilibrium.

How the calculation works

  • Enter the starting activity of the parent.
  • Enter the half-lives of the parent and of the daughter, and the elapsed time, all in the same unit.
  • The calculator gives the two activities, the total, the peak time and value and the half-life ratio.

Example

A molybdenum-99 generator starts with 1,000 MBq. The parent has a half-life of 66 h and the daughter, technetium-99m, of 6.01 h. After 24 h, the parent is at 777.203 MBq and the daughter has built up to 785.987 MBq. The daughter peaks after 22.86 h at 786.579 MBq. The half-life ratio is 10.98, so the equilibrium is transient.

Why it matters

The calculator helps nuclear medicine technologists and physicists, radiochemistry students, health physicists who plan elutions, and geologists who follow decay chains.

Good to know

Use any time unit, but the same one for the two half-lives and the elapsed time. The equation assumes that the daughter has no stock at the start and that only the parent feeds it. It covers two members, and longer chains need more terms. In a generator, the daughter is removed at each elution, so the chain restarts with the remaining parent. Branching, when the parent decays only partly into the daughter, multiplies the daughter activity by the branching ratio, which is about 0.89 for the technetium case. Activities are in becquerels, and one megabecquerel is one million decays per second. When both half-lives are equal, the formula changes to A0 × λ × t × e^(−λt), which the calculator handles.

The radioactive decay calculator treats a single isotope, the half-life calculator converts between decay constants and half-lives, the exponential growth calculator covers rising curves and the dilution calculator handles concentrations.

Frequently asked questions

What is the Bateman equation?

It gives the number of atoms or the activity of each member of a decay chain over time. For a parent decaying into a daughter that has no initial stock, the daughter activity is A2 = A0 × λ2 / (λ2 − λ1) × (e^(−λ1 t) − e^(−λ2 t)), where λ = ln 2 / half-life.

What are secular and transient equilibrium?

When the parent lives longer than the daughter, the daughter activity eventually follows the parent. If the parent is much longer-lived, by a factor of about 1,000 or more, the two activities become equal: secular equilibrium. If the ratio is smaller, the daughter settles at a constant multiple of the parent, λ2 / (λ2 − λ1): transient equilibrium.

Why does the daughter peak?

At first the daughter is produced faster than it decays, so its activity rises. It peaks when the production rate equals its own decay rate, at t = ln(λ2 / λ1) / (λ2 − λ1), then it follows the parent down. This is the principle of a technetium generator, which is milked near the peak.

Was this calculator helpful?

Thanks for your feedback!

Results are estimates provided for information purposes. They do not replace professional advice.