Skip to content
Omnikalc

Radioactive waste decay-in-storage calculator

Enter the initial activity, the half-life and the release level of two radionuclides in a waste package to get the storage time of each, the time for the package, the activity left after ten half-lives and the number of half-lives needed.

Updated on
Your inputs
MBq

Value out of range

days

Value out of range

MBq

Value out of range

MBq

Value out of range

days

Value out of range

MBq

Value out of range

Results

Storage time for the package

79.9 days

Store the package until it falls below the release level, then survey it before release
Time for radionuclide 1
79.9 days
Time for radionuclide 2
3.08 days
Number of half-lives of the slowest radionuclide
12.3
Time for ten half-lives of the longest-lived radionuclide
80.2 days
Fraction remaining after ten half-lives
0.098 %

The radioactive waste decay-in-storage calculator gives the storage time needed for the activity of two radionuclides to fall below their release levels, the number of half-lives and the activity left after ten half-lives.

How the calculation works

  • Enter the activity, the half-life and the release level of each radionuclide.
  • Read the time for each and for the package.
  • Check the ten half-lives rule.

Example

A waste package holds 100 MBq of iodine-131 (half-life 8.02 days) with a release level of 0.1 MBq, and 5000 MBq of technetium-99m (half-life 0.2504 days) with a level of 1 MBq. The iodine needs 8.02 × log2(1000) = 79.9 days and the technetium 3.08 days. The package must be stored 79.9 days. Ten half-lives of the longest one take 80.2 days.

Why it matters

The calculator helps hospital nuclear medicine departments, laboratories, radiation safety officers and students who plan storage of short-lived radioactive waste and want to see which radionuclide limits the time.

Good to know

The release levels depend on the regulation of the country and on the radionuclide, and may be expressed as an activity, a concentration or a dose rate at the surface of the package. The calculation assumes that each radionuclide decays independently and that no long-lived contaminant, such as molybdenum-99 breakthrough from a generator or a parent in a decay chain, is present. Samples with a long-lived component usually cannot be handled by simple storage. A survey with a calibrated instrument before release is always required, and the labels and records of the package must be removed or kept according to the procedure. Keep the stored waste in a secure and shielded place with a clear inventory.

The radioactive decay calculator handles one radionuclide, the half-life calculator converts constants, the patient release calculator treats radioiodine patients and the Bateman calculator treats decay chains.

Frequently asked questions

What is decay in storage?

Waste containing radionuclides with a short half-life is kept until the activity has fallen below the release level, then it is surveyed and released as ordinary waste. The time is t = T½ × log2(A0 / Alimit).

What is the ten half-lives rule?

A common practical rule is to store waste for at least ten half-lives, after which only 0.1 % of the initial activity remains, and to check it with a survey meter at the background level before release. It applies to radionuclides with a half-life of up to about 100 days.

What about mixed waste?

For a mixture, each radionuclide must fall below its own level, so the storage time is that of the slowest one. If the levels are given as a sum rule, the sum of the activity to level ratios must be below 1, which needs a more detailed calculation.

Was this calculator helpful?

Thanks for your feedback!

Results are estimates provided for information purposes. They do not replace professional advice.