Skip to content
Omnikalc

Photodiode responsivity and photocurrent calculator

Enter the wavelength, the quantum efficiency, the optical power, the feedback resistor and the bandwidth to get the photocurrent, the output voltage and the noise.

Updated on
Your inputs
nm

Value out of range

%

Value out of range

µW

Value out of range

kΩ

Value out of range

kHz

Value out of range

Results

Photocurrent

54.85 µA

Responsivity
0.548 A/W
Output voltage of the transimpedance amplifier
0.548 V
Shot noise current
1.33 nA
Thermal noise current of the resistor
0.407 nA
Signal to noise ratio
91.9 dB

The photodiode calculator gives the responsivity, the photocurrent, the output voltage of a transimpedance amplifier, the shot and thermal noise currents and the signal to noise ratio.

How the calculation works

  • Enter the wavelength, the quantum efficiency of the photodiode and the optical power.
  • Enter the feedback resistor of the amplifier and the bandwidth.
  • The calculator gives R = η × λ / 1 239.84, the photocurrent, the voltage across the resistor and the two noise currents at 300 K.

Example

At 850 nm, a photodiode with 80 % quantum efficiency has a responsivity of 0.548 A/W. 100 µW of light give a photocurrent of 54.85 µA and, across 10 kΩ, an output of 0.548 V. In 100 kHz the shot noise is 1.33 nA and the resistor noise 0.407 nA, so the signal to noise ratio is 91.9 dB.

Why it matters

The calculator helps electronics and photonics designers who build light sensors, fiber receivers, spectrometers, pulse oximeters and laser power meters, and who need the signal level and the noise before choosing the resistor and the amplifier.

Good to know

The ratio between the signal and the noise rises with the square root of the power at the shot-noise limit, so it is worth testing the circuit at the lowest light level you expect. The quantum efficiency depends on the wavelength and on the coating, so take it from the data sheet curve. The bandwidth of a transimpedance stage is limited by the capacitance of the diode and the gain-bandwidth of the amplifier, and a large resistor can make the circuit unstable without a compensation capacitor. Dark current adds a constant offset and a noise term that grow with the temperature, especially for germanium and InGaAs diodes. Shield the input from stray light and from electrical pickup, and keep the leads short.

The photon energy calculator relates the wavelength to the energy, the optical link budget calculator checks the power of a fiber link, the noise figure calculator handles the noise of an amplifier and the ADC resolution calculator relates the signal to the converter.

Frequently asked questions

What is the responsivity of a photodiode?

Responsivity is the photocurrent per watt of light: R = η × q × λ / (h × c) = η × λ[nm] / 1 239.84 in A/W. For a quantum efficiency η of 80 % at 850 nm, R is 0.55 A/W. Silicon photodiodes respond from about 300 to 1 100 nm with a peak near 900 nm, and InGaAs photodiodes cover 900 to 1 700 nm.

How is the output voltage of a transimpedance amplifier found?

A transimpedance amplifier turns the photocurrent into a voltage with a feedback resistor: V = I × Rf. A 55 µA photocurrent through 10 kΩ gives 0.55 V. A larger resistor gives more signal and less thermal noise but a smaller bandwidth, because the resistor and the capacitance of the photodiode set a pole at 1 / (2 × π × Rf × C).

What are the main noise sources?

Shot noise comes from the discrete arrival of electrons and equals √(2 × q × I × B). Thermal noise of the feedback resistor is √(4 × k × T × B / Rf). At a high photocurrent the shot noise dominates, and at a low one the thermal noise does. The amplifier adds noise of its own, which is not included here.

How can the signal to noise ratio be improved?

More light helps most, because the signal grows in proportion to the power while the shot noise grows as its square root. A narrower bandwidth, a larger feedback resistor, a cooler circuit and a photodiode with a higher quantum efficiency all help as well. Lock-in detection and averaging reduce the bandwidth effectively.

Was this calculator helpful?

Thanks for your feedback!

Results are estimates provided for information purposes. They do not replace professional advice.