Skip to content
Omnikalc

Polarizer extinction ratio and crossed polarizer leakage calculator

Enter the extinction ratio of the polarizer and the analyzer, their transmission and the angle error to get the leakage, the contrast and the transmitted power.

Updated on
Your inputs
: 1

Value out of range

: 1

Value out of range

%

Value out of range

°

Value out of range

mW

Value out of range

Results

Leakage with the angle error

0.0841 %

Degree of polarization of one polarizer
99.800 %
Transmission with the axes parallel
40.50 %
Leakage with perfectly crossed axes
0.0810 %
Contrast ratio with the angle error
482 : 1
Extinction in decibels
26.8 dB
Power leaking through
8.41 µW

The polarizer extinction ratio calculator gives the degree of polarization, the transmission with parallel axes, the leakage with crossed axes, the contrast ratio, the extinction in decibels and the power that leaks through a polarizer and an analyzer.

How the calculation works

  • Enter the extinction ratio of the polarizer and of the analyzer, as given on the data sheet.
  • Enter the transmission along the pass axis, the angle error from perfect crossing and the input power.
  • The calculator computes the transmission for parallel and crossed axes and the leakage with the angle error.

Example

A polarizer and an analyzer of 1000 : 1 and 1000 : 1, with a pass-axis transmission of 90 %, each have a degree of polarization of 99.800 %. Parallel, the pair transmits 40.50 %. Perfectly crossed, it leaks 0.0810 %, and with an error of 0.5 ° it leaks 0.0841 %, a contrast of 482 : 1 or 26.8 dB, so 10 mW of unpolarized light gives 8.41 µW behind the crossed pair.

Why it matters

The calculator helps optical engineers, display and camera designers, microscopists and photographers who use crossed polarizers to block glare or to make a light valve, and who need to know how dark the dark state is.

Good to know

The extinction ratio depends on the wavelength, the angle of incidence and the quality of the film, and it is usually quoted at the best wavelength only. A tilt of a few degrees can lower it by a factor of ten. Align the polarizer by rotating it until the transmitted power is at a minimum, and use a rotation mount with a fine scale. Keep the polarizers clean and flat, because dust and strain birefringence depolarize light. For very dark states, add a second polarizer in series, which multiplies the extinction ratios. For a laser, place a polarizer with a high ratio after the source to clean up the polarization.

The Malus law calculator gives the transmission at any angle, the Fresnel reflectance calculator gives the reflections on the surfaces, the laser beam spot calculator sizes the beam on the polarizer and the color contrast calculator compares light and dark levels in another setting.

Frequently asked questions

What is the extinction ratio of a polarizer?

The extinction ratio is the transmission along the pass axis divided by the transmission along the blocking axis, written as a number to one. A polarizer of 1 000 : 1 lets through one thousandth as much light with the wrong polarization as with the right one. Film polarizers reach 100 to 10 000 : 1, and calcite or wire-grid crystal polarizers reach 100 000 : 1 or more.

Why is the contrast of two crossed polarizers only half of the ratio?

With unpolarized light, each polarizer passes the full pass-axis light on one polarization and a small fraction on the other. When two identical polarizers are crossed, the leakage adds the two small terms, so the system contrast is about half of the extinction ratio of one polarizer. Two polarizers of 1 000 : 1 give about 500 : 1.

How much does an angle error matter?

The leakage grows with the square of the angle error. At 0.5 degrees, the angle term alone is sin² of 0.5 degrees, about 0.0076 %, which is small next to the intrinsic leakage of a 1 000 : 1 pair but dominates a 100 000 : 1 pair. For high extinction, the axes must be aligned within a few hundredths of a degree.

Does this apply to laser light?

For a linearly polarized laser, replace the unpolarized input with a polarized one and the leakage follows Malus law with the extinction ratio as a floor. The calculator assumes unpolarized input and identical pass-axis transmission, which suits lamps, LEDs and displays. Reflections, birefringent windows and tilted surfaces also reduce the real extinction.

Was this calculator helpful?

Thanks for your feedback!

Results are estimates provided for information purposes. They do not replace professional advice.