Skip to content
Omnikalc

Relativistic velocity addition calculator: why 0.8c plus 0.7c is not 1.5c

Enter two speeds as fractions of the speed of light to get their relativistic combination, the naive sum, the speed in km/s and the Lorentz factor.

Updated on
Your inputs
% of c

Value out of range

% of c

Value out of range

Results

Speed seen by the observer (relativistic)

96.154 % of c

Naive sum of the two speeds
150.00 % of c
The naive sum exceeds the speed of light: the classical formula fails here
Speed seen by the observer in km/s
288,262 km/s
Lorentz factor γ of the combined speed
3.6407

Adding speeds is not as simple as it seems when they are close to the speed of light. The relativistic velocity addition calculator takes the speed of an object in a moving frame and the speed of that frame, and gives the combined speed, the naive sum, the speed in km/s and the Lorentz factor.

How the calculation works

  • Enter the speed of the object measured in the moving frame, and the speed of the frame relative to the observer, both as a percentage of the speed of light.
  • The classical rule simply adds the speeds. At high speeds this fails, and the correct rule is w = (u + v) ÷ (1 + u × v ÷ c²).
  • The result is always below c, however large u and v are. For small speeds, the denominator is almost 1 and the formula matches the classical sum.
  • The calculator also shows the speed in km/s and the Lorentz factor γ = 1 ÷ √(1 − w²/c²) of the combined speed.

Example

A spacecraft moves at 70 % of c past an observer and fires a probe forward at 80 % of c relative to the spacecraft. The naive sum is 150 % of c, which is impossible. The correct speed is (0.8 + 0.7) ÷ (1 + 0.56) = 96.15 % of c, or about 288,262 km/s, and the Lorentz factor is 3.641.

Why it matters

Physics courses use velocity addition to show that nothing can be made to exceed the speed of light. The calculator helps check homework and builds intuition on how quickly relativistic effects grow.

Good to know

The formula applies to speeds along the same straight line. For velocities at an angle, the full vector transformation is needed. Inputs are limited to less than 100 percent of c, because massive objects cannot reach the speed of light.

The time dilation calculator shows how the Lorentz factor slows clocks, and the relativistic energy calculator gives the energy of a fast particle.

Frequently asked questions

Why can't speeds just be added at high velocities?

Special relativity requires the speed of light to be the same for all observers. If speeds simply added, a light beam fired from a moving ship would travel faster than c for someone on the ground. The correct formula keeps every result below c.

When is the classical sum good enough?

When both speeds are small compared with c. At 1 percent of c each, the relativistic result differs from the classical sum by only about 0.01 percent. The difference becomes large above roughly 10 percent of c.

What happens if one of the speeds is exactly c?

The result is exactly c, whatever the other speed is. This is why light always travels at c for every observer, and it is built into the formula.

What is the Lorentz factor used for?

It tells how strongly relativistic effects act at the combined speed. Time runs slower by a factor γ, lengths shrink by 1/γ along the direction of motion, and the energy of a moving particle is γ times its rest energy.

Was this calculator helpful?

Thanks for your feedback!

Results are estimates provided for information purposes. They do not replace professional advice.