Skip to content
Omnikalc

Drift velocity calculator: the speed of electrons in a copper wire

Choose a metal, a wire diameter and a current to get the drift velocity of the electrons, the time to travel one meter and the current density.

Updated on
Your inputs
mm

Value out of range

A

Value out of range

Results

Drift velocity of the electrons

0.3341 mm/s

Time for an electron to travel 1 meter
49:53
Current density
4.545 A/mm²
Free-electron density
8.49 × 10²⁸ /m³
Electrons crossing a section per second
93.62 × 10¹⁸ /s

Electrons drift in a wire much more slowly than most people think. The drift velocity calculator gives the speed of the electrons in a wire of copper, aluminum, silver, gold or iron, from the current and the diameter of the wire. It also gives the time to travel one meter and the current density.

How the calculation works

  • Choose the metal of the wire. The calculator uses its density of free electrons n.
  • Enter the diameter of the wire and the current I.
  • The drift velocity is v = I / (n A e), where A is the cross-section area and e = 1.602 × 10⁻¹⁹ C.
  • The result also shows the time for an electron to travel one meter, the current density and the number of electrons that cross a section every second.

Example

A copper wire with a diameter of 2.05 mm (section 3.30 mm²) carries 15 A. With n = 8.49 × 10²⁸ electrons per cubic meter, the drift velocity is only 0.3341 mm/s. An electron needs 2,993 s, about 50 minutes, to travel one meter, and the current density is 4.545 A/mm².

Why it matters

The drift velocity corrects a common misconception about electric current, that the electrons themselves race along the wire. It is a good example of the difference between the speed of a signal and the speed of the charge carriers, and it is a basic idea in physics courses on electricity, in electronics and in the study of semiconductors.

Good to know

The calculator assumes a uniform current density in a round wire and one free electron density per metal at room temperature, with values rounded to three digits. The density of free electrons depends on the number of electrons that each atom gives to the conduction band, and the real value of an alloy is different from that of the pure metal. At high frequency, the current concentrates near the surface of the wire (skin effect), and the drift velocity is no longer uniform.

The Ohm’s law calculator links voltage, current and resistance, the wire resistance calculator gives the resistance of the wire in the example, the wire ampacity calculator gives the maximum safe current for a given gauge, and the Hall effect calculator measures the density of the charge carriers.

Frequently asked questions

What is the drift velocity?

It is the average speed at which the free electrons of a conductor move along the wire when a current flows. On top of this slow movement, each electron moves randomly at a speed of about a million meters per second and collides all the time with the atoms. Only the small net displacement along the field produces the current.

Why is it so small if the light turns on at once?

The signal does not travel with the electrons. When you close a switch, the electric field spreads along the wire at a speed close to that of light, and all the free electrons start to move at the same time, everywhere. The lamp turns on at once, while each electron moves by only a fraction of a millimeter per second.

What does the drift velocity depend on?

It grows with the current and falls with the cross section of the wire and with the density of free electrons, v = I / (n A e). A thinner wire at the same current has a larger drift velocity, and a metal with more free electrons per volume has a smaller one. In semiconductors, n is much lower, so the drift velocity is much higher.

Is it the same for alternating current?

With alternating current at 50 or 60 Hz, the electrons only oscillate back and forth around a fixed position, with an amplitude of a fraction of a millimeter, and they do not travel along the wire. The energy still flows from the source to the load, through the electromagnetic field around the conductor.

Was this calculator helpful?

Thanks for your feedback!

Results are estimates provided for information purposes. They do not replace professional advice.