The Saffir–Simpson hurricane category calculator gives the category from the sustained wind, the category suggested by the central pressure, the wind in knots and meters per second, the dynamic wind pressure, the typical storm surge and the wind needed for the next category.
How the calculation works
- Enter the maximum sustained wind speed, averaged over one minute.
- Enter the central pressure of the storm in millibars (hectopascals).
- Read the category, the wind pressure and the typical surge.
Example
Sustained winds of 120 mph, that is 104 kt or 53.6 m/s, make a category 3 hurricane, while a central pressure of 950 mb suggests category 3. The dynamic wind pressure is 36.9 psf, and the typical storm surge is 10.5 ft. The next category starts at 130 mph.
Why it matters
The calculator helps students, emergency planners, boaters, coastal residents and weather enthusiasts who read a forecast advisory and want to convert the wind into a category, into other units and into the force on buildings, and to understand the escalation between categories.
Good to know
The official category is based on the wind alone, using the one-minute sustained wind at 10 meters over open water, so use that number and not a gust. The pressure category is only a rough correspondence, because the pressure–wind relation depends on the size and the latitude of the storm. The surge values are typical and not a forecast, and a given storm can produce much more or less surge. Follow the advisories of the national weather service and evacuate when told to do so.
Related tools
The Beaufort scale calculator classifies lower winds, the wind chill calculator combines cold and wind, the wind load calculator gives the force on a structure and the hurricane tie-down uplift force calculator sizes the connectors of a roof.