Skip to content
Omnikalc

Scherrer equation crystallite size calculator

Enter the X-ray wavelength, the peak position, the peak width and the instrument broadening to get the crystallite size and the plane spacing.

Updated on
Your inputs
nm

Value out of range

°

Value out of range

°

Value out of range

°

Value out of range

Value out of range

Results

Crystallite size

34.3 nm

Corrected peak width
0.2449 °
Size without the instrument correction
33.6 nm
Plane spacing d
0.2354 nm
Share of the width due to the instrument
4.0 %

The Scherrer equation calculator gives the crystallite size from the width of an X-ray diffraction peak, with the corrected width, the size without the instrument correction, the plane spacing and the share of the width due to the instrument.

How the calculation works

  • Enter the X-ray wavelength of your source and the peak position 2θ.
  • Enter the measured width at half maximum and the instrument broadening.
  • The calculator subtracts the instrument width in quadrature and applies the Scherrer equation.

Example

A peak at 38.2 ° measured with 0.15406 nm has a width of 0.25 °, of which the instrument contributes 4.0 % of the square. The corrected width is 0.2449 ° and the crystallite size is 34.3 nm, against 33.6 nm without correction. The plane spacing is 0.2354 nm.

Why it matters

The calculator helps materials scientists, chemists and students who analyse powders, nanoparticles, catalysts and thin films by X-ray diffraction, and who want a quick estimate of the crystallite size from a peak.

Good to know

Use a single, isolated peak, fit it with a Gaussian or a pseudo-Voigt profile, and report the width at half maximum in the same unit as the instrument width. Use the same K as your reference, 0.9 for spherical crystallites and 0.94 for cubic ones. The result is the volume-averaged size of the coherent domains, which can be smaller than the particle size seen by electron microscopy. Compare several peaks, because a size that depends on the angle shows microstrain. Make sure that the sample is flat and well packed, and that overlapping peaks do not widen the one you measure. Report the wavelength and the shape factor with the result so that others can reproduce it.

The Bragg law calculator gives the diffraction angle of a spacing, the photon energy calculator links the wavelength of the X-rays to their energy, the thin film interference calculator treats a related wave effect and the diffraction grating calculator handles the optical case.

Frequently asked questions

What does the Scherrer equation give?

It gives the mean size of the coherent crystalline domains from the broadening of a diffraction peak: D = K × λ / (β × cos θ), where λ is the X-ray wavelength, β the width of the peak at half maximum in radians, θ half the peak position angle and K a shape factor near 0.9. Smaller crystallites give broader peaks.

Why subtract the instrument broadening?

Even a perfect crystal gives a peak of finite width because of the instrument. The measured width is, to a good approximation, the quadrature sum of the sample and instrument widths, so β = √(FWHM² − b²). Measure b with a standard like LaB6 or silicon, at the same angle. Without this correction, the size is underestimated.

What are the limits of the method?

The Scherrer equation applies to crystallites smaller than about 100 to 200 nm. Above this, the instrument broadening dominates. It also ignores the microstrain, which broadens peaks as well, and the shape of the grains. A Williamson-Hall plot with several peaks separates the size and the strain.

Which wavelength should I use?

Use the wavelength of your source. Copper Kα radiation is 0.15406 nm, molybdenum Kα 0.07107 nm, cobalt Kα 0.17890 nm. The size is in the same unit as the wavelength, so the result is in nanometres here. The peak position is the angle 2θ shown on the diffractogram, not θ.

Was this calculator helpful?

Thanks for your feedback!

Results are estimates provided for information purposes. They do not replace professional advice.