Skip to content
Omnikalc

Single-slit diffraction calculator

Enter the wavelength, the width of the slit and the distance to the screen to get the angle and position of the dark fringes and the width of the central bright band.

Updated on
Your inputs
nm

Value out of range

µm

Value out of range

m

Value out of range

Value out of range

Results

Angle of the first dark fringe

0.315 °

Position of the first dark fringe on the screen
11.00 mm
Width of the central bright band
22.00 mm
Position of the dark fringe of the chosen order
11.00 mm
Dark fringes on each side of the center
181
Intensity of the first side maximum compared with the center
4.72 %

The single-slit diffraction calculator gives the angle and the position of the dark fringes and the width of the central bright band when light of a given wavelength passes through a narrow slit.

How the calculation works

  • Enter the wavelength and the width of the slit.
  • Enter the distance to the screen and the order of a dark fringe.
  • The calculator gives the angle of the first minimum, its position, the central width, the position of the chosen order and the number of dark fringes.

Example

Green light of 550 nm through a slit of 100 µm gives sin θ = 0.55 / 100 = 0.0055, so the first dark fringe is at 0.315°. On a screen 2 m away it is at 11.00 mm from the center, and the central bright band is 22.00 mm wide. A slit of this width has 181 dark fringes on each side.

Why it matters

The calculator helps physics students and teachers to prepare a laser experiment, to measure the width of a hair or a slit from the pattern and to see how diffraction limits an opening.

Good to know

A laser pointer, a slit made with two razor blades and a wall a few meters away are enough to see the pattern. Measure the width of the central band, then invert the formula to find the slit width: a = 2 λ d / w for a small angle. The same relation gives the thickness of a hair, which acts as a slit of the same width. Use a narrow beam and a dark room, since the side maxima are faint. A red laser of 650 nm gives a wider pattern than a green one of 532 nm, and a narrower slit gives a wider pattern. The shape of the light intensity follows (sin β / β)² with β = π a sin θ / λ.

The double-slit calculator adds the interference fringes, the diffraction grating calculator gives the angles of many slits, the laser beam spot calculator gives the spreading of a beam and the wavelength calculator links frequency and wavelength.

Frequently asked questions

What is the condition for the dark fringes?

For a slit of width a lit by a plane wave, dark fringes appear at the angles where a sin θ = m λ, with m = 1, 2, 3… The central bright band is twice as wide as the others and its half width is given by the first minimum. The narrower the slit, the wider the pattern, which is the opposite of what the shadow of a wide opening suggests.

How does it differ from the double slit?

A double slit adds fast interference fringes, with a spacing set by the distance between the slits, inside the broad envelope of the diffraction of each slit. A single slit gives only that envelope, a wide central band and weak side maxima. The first side maximum has about 4.7 % of the central intensity.

When is the formula not valid?

The formula is for far field diffraction, with a screen far from the slit or a lens after it, for which the distance should be much larger than a² / λ. For a slit narrower than the wavelength, there is no dark fringe and the light spreads in all directions, so the calculator returns 0 for the orders that do not exist.

Was this calculator helpful?

Thanks for your feedback!

Results are estimates provided for information purposes. They do not replace professional advice.