Skip to content
Omnikalc

Sound power level calculator: how much sound power does a machine radiate?

Enter a sound pressure level, the distance and the position of the source to get the sound power level, the acoustic power and the level at another distance.

Updated on
Your inputs
dB

Value out of range

ft

Value out of range

ft

Value out of range

Results

Sound power level Lw

102.7 dB

Sound power of the source
18.459 mW
Sound intensity at the measurement point
0.3162 mW/m²
Sound pressure level at the second distance
75.5 dB
Directivity index
3.0 dB

A noisy machine is described by the power of its sound, not by the level you measure at one place. This sound power level calculator converts a sound pressure level, a distance and the position of the source into the sound power level in dB and the acoustic power in milliwatts. It also gives the intensity at the microphone and the level at a second distance.

How the calculation works

  • Enter the sound pressure level you measured, the distance of the measurement and the position of the source (free space, on a floor, against a wall, in a corner).
  • The source has a directivity factor Q of 1, 2, 4 or 8 according to the solid angle into which it radiates.
  • The sound power level is Lw = Lp + 10 log₁₀(4π r² / Q), with a reference of 1 pW, and the power is 10^(Lw/10) pW.
  • Enter a second distance to find the sound pressure level there, since the level falls by 6 dB per doubling of distance in the free field.

Example

A machine on a hard floor (Q = 2) measures 85 dB at 10 ft (3.05 m). The sound power level is Lw = 85 + 10 log₁₀(4π × 3.05² / 2) = 102.7 dB, which is 18.5 mW of acoustic power. At 30 ft the level falls to 75.5 dB.

Why it matters

The sound power level is the quantity used to compare equipment noise, to prepare noise maps of a plant or an outdoor unit, and to predict the level at a neighbor’s boundary. A quick calculation from a handheld measurement helps decide if a source needs an enclosure or a barrier.

Good to know

The calculator assumes free-field propagation over a spherical or hemispherical surface with no reflections other than the ground, and a measurement in the far field, at a distance larger than the source size and the wavelength. Indoors, in a reverberant room, the level stops falling with distance, and the room constant must be considered. The calculation is the same for A-weighted and unweighted levels, but do not mix them.

The sound distance calculator shows how the level falls with distance, the decibel addition calculator adds the levels of several sources, the acoustic impedance calculator covers waves in a medium, and the reverberation time calculator covers a room.

Frequently asked questions

What is the difference between sound power and sound pressure?

Sound power is the total acoustic energy per second that a source emits, in watts. It is a property of the source. Sound pressure is the pressure variation that a microphone senses at a place, in pascals, and it depends on the distance, the room and the surroundings. Two machines of the same power sound different in different rooms.

What is the directivity factor Q?

A source in free space radiates over a sphere (Q = 1). On a hard floor it radiates over a hemisphere, so the intensity in the half space doubles (Q = 2, +3 dB). Against a wall Q is 4 (+6 dB) and in a corner Q is 8 (+9 dB). The directivity index is DI = 10 log₁₀ Q.

Why is the sound power level used for noise labels?

Because it does not change with the room or the distance, it allows comparing machines such as air conditioners, pumps, fans and power tools. Regulations in many countries require the sound power level (LWA) on the label of outdoor equipment and household appliances.

How accurate is a single measurement?

The result is valid only if the measurement is made in the far field, in a place with little reflection and little background noise. Standards such as ISO 3744 use many microphone positions on a measurement surface, and the A-weighting must be the same for the level and the power. A single point gives an order of magnitude.

Was this calculator helpful?

Thanks for your feedback!

Results are estimates provided for information purposes. They do not replace professional advice.