Skip to content
Omnikalc

Fermi level calculator: where does the Fermi level sit in a doped semiconductor?

Enter the doping, the intrinsic carrier concentration, the temperature and the band gap to get the Fermi level, the carrier concentrations and the distance to the band edge.

Updated on
Your inputs

Value out of range

Value out of range

K

Value out of range

eV

Value out of range

Results

Fermi level relative to the intrinsic level (Ef − Ei)

0.3572 eV

Thermal energy kT
25.85 meV
Distance from the Fermi level to the nearest band edge
0.2028 eV
Electron concentration, as log10 of the value in cm⁻³
16.00
Hole concentration, as log10 of the value in cm⁻³
4.00
Majority carrier concentration over the intrinsic one, as log10
6.00

In semiconductor devices, the position of the Fermi level decides the carrier concentrations and the band bending at junctions. The Fermi level calculator takes the type of doping, the doping concentration, the intrinsic carrier concentration, the temperature and the band gap, and gives the Fermi level relative to the intrinsic level, the thermal energy, the distance to the nearest band edge and the electron and hole concentrations.

How the calculation works

  • Choose the type of doping: n-type with donors or p-type with acceptors.
  • Enter the doping concentration and the intrinsic carrier concentration as powers of ten in cm⁻³, for example 16 for 10¹⁶ cm⁻³ and 10 for silicon at 300 K.
  • Enter the temperature and the band gap. The intrinsic level is assumed to lie at mid-gap.
  • The majority carrier concentration is N/2 + √((N/2)² + nᵢ²) and the Fermi level is kT · ln(n ÷ nᵢ) above the intrinsic level for n-type material, and below it for p-type.

Example

Silicon at 300 K has nᵢ = 10¹⁰ cm⁻³ and a band gap of 1.12 eV. Doped n-type with 10¹⁶ cm⁻³ donors, the electron concentration is about 10¹⁶ cm⁻³ and the hole concentration is nᵢ² ÷ n = 10⁴ cm⁻³. With kT = 25.85 meV, the Fermi level is 0.02585 × ln(10⁶) = 0.357 eV above the intrinsic level, which is 0.203 eV below the conduction band edge.

Why it matters

The Fermi level shows how strongly a semiconductor is doped and how far it is from the band edges, which sets the built-in voltage of a p-n junction, the threshold voltage of a transistor and the work function of the material. Doing the calculation with logarithms avoids huge numbers.

Good to know

The calculation assumes full ionization of the dopants, Boltzmann statistics (non-degenerate doping), mid-gap intrinsic level and a single dopant type. It does not cover compensated or heavily doped material. Concentrations are entered and shown as powers of ten.

The Boltzmann factor calculator is the statistics behind the formula, the Hall effect calculator measures carrier concentrations, and the photon energy calculator relates the band gap to light.

Frequently asked questions

What is the Fermi level?

In a semiconductor, the Fermi level is the energy at which the probability of finding an electron is one half. In an intrinsic semiconductor it lies near the middle of the band gap. Doping moves it: towards the conduction band for n-type material and towards the valence band for p-type material.

Why is the intrinsic level assumed to be at mid-gap?

It is a common approximation, which is exact only if the effective masses of electrons and holes are equal. In silicon the intrinsic level lies a few tens of meV from mid-gap at room temperature. The error is small compared with the shift due to doping.

Why must I enter nᵢ?

The intrinsic carrier concentration depends strongly on temperature and on the material: about 10¹⁰ cm⁻³ for silicon at 300 K, 2 × 10⁶ for gallium arsenide and 2 × 10¹³ for germanium. Because it changes by orders of magnitude over a few hundred kelvin, enter the value that matches your temperature.

When does the simple formula stop working?

At very high doping the semiconductor becomes degenerate: the Fermi level reaches the band edge and Boltzmann statistics fail. The result is also not valid when the dopants are not fully ionized, which happens at low temperature, or at high temperature when the intrinsic carriers outnumber the dopants.

Was this calculator helpful?

Thanks for your feedback!

Results are estimates provided for information purposes. They do not replace professional advice.