Ocean waves travel at a speed that depends on their period and on how deep the water is, and the relation between them is not a simple one. The ocean wave speed calculator takes the wave period and the water depth, and gives the wavelength, the wave speed, the group speed, the relative depth with a classification, and the deep-water wavelength.
How the calculation works
- Enter the wave period, the time between two crests passing a point, and the water depth.
- The calculator solves the dispersion relation of linear waves, ω² = g k tanh(k h), with the explicit approximation of Hunt, which is accurate to about 0.1 %.
- It gives the wavelength L, the wave speed c = L / T, the group speed (the speed at which wave energy travels) and the relative depth h / L.
- Compare with the deep-water wavelength L₀ = g T² / 2π. When h / L is above 0.5, the water is deep, and when it is below 0.05, it is shallow.
Example
Swell with a period of 8 s reaches a depth of 30 ft. In deep water, its wavelength would be 32.174 × 8² / 2π = 327.7 ft. At 30 ft, the dispersion relation gives a wavelength of 193.6 ft, a speed of 24.2 ft/s (about 16.5 mph) and a group speed of 19.0 ft/s. The relative depth is 0.155, so the depth is intermediate and the bottom is slowing the waves.
Why it matters
Sailors, surfers, coastal engineers and anyone who reads a swell forecast need to link the period to the length and speed of the waves. The calculation helps to judge when a swell arrives, how the waves change on a reef or a sandbar, and whether a harbour entrance or a pier is in deep or shallow water.
Good to know
The calculator uses linear (Airy) wave theory for a flat bottom and waves of small height. Large waves, currents, a sloping bottom and breaking change the results, and the wavelength is the one for a single regular wave, not for a storm sea. The Hunt approximation is accurate to about 0.1 % for all depths. Treat the result as a good estimate for planning.
Related tools
The speed of sound calculator covers waves in air, the pipe resonance calculator covers standing waves in a tube, the hydraulic jump calculator covers sudden changes in open flow, and the wind load calculator covers forces on structures.