Skip to content
Omnikalc

Specific impulse calculator: how efficient is your rocket engine?

Enter the thrust and the propellant flow rate to get the specific impulse in seconds, the exhaust velocity, the propellant used and the delta-v of a burn.

Updated on
Your inputs
lbf

Value out of range

lb/s

Value out of range

s

Value out of range

lb

Value out of range

Results

Specific impulse

305.6 s

Effective exhaust velocity
9,830.9 ft/s
Propellant used
1,080.0 lb
Velocity change (delta-v)
1,123.6 ft/s
Total impulse
330,000 lbf·s

Specific impulse is the miles per gallon of a rocket engine. The specific impulse calculator takes the thrust, the propellant flow rate, the burn time and the initial mass, and gives the specific impulse, the effective exhaust velocity, the propellant used, the delta-v of the burn and the total impulse.

How the calculation works

  • Enter the thrust of the engine and the propellant flow rate, the mass of propellant burned each second.
  • The specific impulse is the thrust per unit of propellant weight flow: Isp = F ÷ (ṁ × g₀). It is measured in seconds, and in US units the pound-force and pound cancel, so Isp = lbf ÷ (lb/s).
  • The effective exhaust velocity is Isp × g₀, with g₀ = 32.174 ft/s². Enter the burn time and the initial mass to get the propellant used.
  • The delta-v comes from the rocket equation, ve × ln(m₀ ÷ m_final), and the total impulse is thrust × burn time.

Example

An engine produces 5,500 lbf of thrust and burns 18 lb/s of propellant. The specific impulse is 5,500 ÷ 18 = 305.6 s, and the effective exhaust velocity is 305.6 × 32.174 = 9,831 ft/s. In a 60 s burn, the rocket uses 1,080 lb of propellant. If it starts at 10,000 lb, the velocity change is 9,831 × ln(10,000 ÷ 8,920) = 1,124 ft/s, and the total impulse is 330,000 lbf·s.

Why it matters

Rocket designers, students and hobbyists use specific impulse to compare engines and propellants. Together with the mass ratio, it sets how much velocity change a vehicle can achieve.

Good to know

The delta-v assumes a constant thrust and flow rate, in free space and with no gravity or drag losses. Real engines change thrust with altitude, and the effective exhaust velocity differs from the actual one. Use the result as an idealized figure.

The rocket equation calculator gives the delta-v from the mass ratio, and the thrust-to-weight calculator checks if the rocket can lift off.

Frequently asked questions

What is specific impulse?

It is a measure of how efficiently a rocket engine uses propellant. It is the thrust divided by the weight of propellant burned each second, which gives a value in seconds. A higher specific impulse means that the engine produces more thrust for the same amount of propellant.

How is it related to the exhaust velocity?

The effective exhaust velocity equals the specific impulse multiplied by standard gravity, ve = Isp × g₀. An engine with an Isp of 300 s has an exhaust velocity of about 2,940 m/s. In the rocket equation, the delta-v is proportional to this velocity.

What are typical values?

Solid rocket motors reach about 250 s. Kerosene and liquid oxygen engines reach 280 to 350 s, liquid hydrogen engines about 450 s at vacuum, and electric ion thrusters thousands of seconds. Values depend on whether the engine operates at sea level or in vacuum.

Why is the unit seconds, and does the unit system matter?

Because the thrust is divided by a weight flow, force over force per second gives seconds. The number is the same in metric and US units, as long as you divide by the weight flow. With a mass flow in kg/s, divide also by g₀, as the calculator does.

Was this calculator helpful?

Thanks for your feedback!

Results are estimates provided for information purposes. They do not replace professional advice.